Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How to deal with 35128WT EEPROM ?
28-01-2018, 17:33 PM,
Post: #1
|
|||
|
|||
How to deal with 35128WT EEPROM ?
Hi, have anybody meet this eeprom already? is is larger than 35160 and my programmer can not read full dump.
BMW tuning & retrofitting, https://www.instagram.com/cebepspb/
* lifetime EVO, ROUTE codes, Carplay, ECU Remap and other crap |
|||
28-01-2018, 20:24 PM,
Post: #2
|
|||
|
|||
RE: How to deal with 35128WT EEPROM ?
You need emulator,remove chip than read eeprom, than read its id, then upload all readed and confgured data to 160qwt(depends on emulator) and solder 35160wt and 160qwt to emulator and emulator to board
|
|||
29-01-2018, 07:48 AM,
Post: #3
|
|||
|
|||
RE: How to deal with 35128WT EEPROM ?
(28-01-2018, 20:24 PM)muskatas Wrote: You need emulator,remove chip than read eeprom, than read its id, then upload all readed and confgured data to 160qwt(depends on emulator) and solder 35160wt and 160qwt to emulator and emulator to board what programmer can read it? except dp4 BMW tuning & retrofitting, https://www.instagram.com/cebepspb/
* lifetime EVO, ROUTE codes, Carplay, ECU Remap and other crap |
|||
29-01-2018, 08:20 AM,
Post: #4
|
|||
|
|||
RE: How to deal with 35128WT EEPROM ?
Enigma, smok programmers
|
|||
20-05-2019, 01:18 AM,
Post: #5
|
|||
|
|||
RE: How to deal with 35128WT EEPROM ?
There is no chance to erase them?
Or write the id on new eeprom? I don't want to use emulators... |
|||
20-05-2019, 18:50 PM,
Post: #6
|
|||
|
|||
RE: How to deal with 35128WT EEPROM ?
orange 5 can read full dump
|
|||
21-05-2019, 10:44 AM,
Post: #7
|
|||
|
|||
RE: How to deal with 35128WT EEPROM ?
|
|||
22-05-2019, 09:14 AM,
Post: #8
|
|||
|
|||
RE: How to deal with 35128WT EEPROM ?
(21-05-2019, 10:44 AM)pietje001 Wrote:Lol dude. How can you replace 35128 with 35160 (half the size)(20-05-2019, 18:50 PM)jonny81 Wrote: orange 5 can read full dump Think before posting crap. FYI mileage on G series is not stored on 1st lines of 35128 so no incremental erase need. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content