[Siller]

Hello,

Could someone provide me with the full ICOM C cable pinout? Ordered icom c cable from china but seems that many pins are connected wrong.

[aleksandrw]

mine is
7-obd 2
14-obd16
15- obd 8
16-obd 1
17-obd7
19-obd 4 and 5
20-obd 7
obd 6 not used
obd 9 not used
obd14 not used
came with icom next clone . never used this cable so i dont know if works , but maybe you can make an idea

[Siller]

Mine pinout was the same but pin 15 is l line and should connect to obd 15?

[Enabled]

A real and correct ICOM-C has a printed circuit board on the obd head side, which has some functional use. It's not just wires from one end to another, there is an Atmel controller and other IC.

[Siller]

Okay. Where is it possible to buy icom c cable?

[KahN]

Order numbers for icom products.

81312360883 Icom A
81312360884 Icom B
81312360885 Icom C

[DNK76]

ICOM C from China
it has reverse pins,
to work properly with ICOM A2, I need
extension cable with a blue plug 16 pin,
this extension cord also has reverse pins together,
will work with ICOM A1, A2 and ICOM NEXT,
you can do a 20-pin adapter for yourself, for icom next
bmw models from 96th (e38, e39, e46, e52, e53) only on the K line
OBD2 16pin ----------------------------------------> 20pin
pin 1 (IGN) ---------------------------------------- -> pin 16 IGN
pin 4 and 5 (GND) ((connected) ------------------ > pin 19 GND
pin 7 (K-line) --------------------------------------- > pin 17 and 20 K-line (connected)
pin 16 (+12V) ------------------------------------- -> pin 14 +12V
L-line will not work without PCBs and ICOM C
pin 8 (k-line) ----------------------------------------> pin 15 L-line