Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

DDC/EDC Hardware OFF
24-05-2019, 06:21 AM,
Post: #1
XZBMW  DDC/EDC Hardware OFF
hello together,

I once looked at the plans in rheingold, why cost the ddc-off modules of kw and other manufacturers 300€/$?
basically, the shock absorbers have only one coil, so a resistance (measured about 3ohm)
...you can use a 50-100 watt resistor with about 3ohm to put down each shock absorber

Or did I get this wrong ?


HTM

idea Click @ Thanks & Rep. idea 
* BUY  -> MEGA.nz Account 
CREATE AN ACCOUNT YOURSELF - GET THE DATA INTO YOUR ACCOUNT - OFFER IT TO SOMEONE ELSE FROM THERE
Quote this message in a reply
24-05-2019, 14:02 PM,
Post: #2
RE: DDC/EDC Hardware OFF
(24-05-2019, 06:21 AM)hashtagmaster Wrote:  hello together,

I once looked at the plans in rheingold, why cost the ddc-off modules of kw and other manufacturers 300€/$?
basically, the shock absorbers have only one coil, so a resistance (measured about 3ohm)
...you can use a 50-100 watt resistor with about 3ohm to put down each shock absorber

Or did I get this wrong ?


HTM

if it's an F series, remove 2VF from VO and code DSC, HU, KOMBI & ICM.

No resistors or KW inhibitors needed.
Quote this message in a reply
24-05-2019, 17:15 PM,
Post: #3
RE: DDC/EDC Hardware OFF
(24-05-2019, 14:02 PM)Wibbles Wrote:  
(24-05-2019, 06:21 AM)hashtagmaster Wrote:  hello together,

I once looked at the plans in rheingold, why cost the ddc-off modules of kw and other manufacturers 300€/$?
basically, the shock absorbers have only one coil, so a resistance (measured about 3ohm)
...you can use a 50-100 watt resistor with about 3ohm to put down each shock absorber

Or did I get this wrong ?


HTM

if it's an F series, remove 2VF from VO and code DSC, HU, KOMBI & ICM.

No resistors or KW inhibitors needed.


yes I know everything but I will not encode because the control unit will still red in rheingold in it after the coding...

idea Click @ Thanks & Rep. idea 
* BUY  -> MEGA.nz Account 
CREATE AN ACCOUNT YOURSELF - GET THE DATA INTO YOUR ACCOUNT - OFFER IT TO SOMEONE ELSE FROM THERE
Quote this message in a reply
24-05-2019, 21:41 PM,
Post: #4
RE: DDC/EDC Hardware OFF
(24-05-2019, 17:15 PM)hashtagmaster Wrote:  
(24-05-2019, 14:02 PM)Wibbles Wrote:  
(24-05-2019, 06:21 AM)hashtagmaster Wrote:  hello together,

I once looked at the plans in rheingold, why cost the ddc-off modules of kw and other manufacturers 300€/$?
basically, the shock absorbers have only one coil, so a resistance (measured about 3ohm)
...you can use a 50-100 watt resistor with about 3ohm to put down each shock absorber

Or did I get this wrong ?


HTM

if it's an F series, remove 2VF from VO and code DSC, HU, KOMBI & ICM.

No resistors or KW inhibitors needed.


yes I know everything but I will not encode because the control unit will still red in rheingold in it after the coding...

You can update vcm and msm and there won’t be any red control unit in rheindgold.

Thanks
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW BMW EntryNav2 CarPlay hardware compatibility list 320ed 5 386 09-04-2024, 09:53 AM
Last Post: PsevDo
  Rear radars hardware not suitable for equipment Matthew53 3 286 12-12-2023, 17:54 PM
Last Post: dumitru.o
XZBMW ICOM Next How to Hardware reset (correct bin file ?) Fraizer 16 2,963 09-08-2023, 19:34 PM
Last Post: r0my81
XZBMW Hardware to flash E65 745D dominpl 1 252 26-04-2023, 19:47 PM
Last Post: SkeYT
  EsysPlus and hardware change It3_Magic 1 441 03-02-2023, 11:48 AM
Last Post: izm
  ISTA+ 4.36.40 on F30 - Measures Plan Contains Hardware Actions int 10 1,360 11-09-2022, 05:49 AM
Last Post: ____ANGEL___
XZBMW BMW DIS Hardware Specification psampson 6 759 29-05-2022, 10:28 AM
Last Post: knarrenheinz
XZBMW 2021 DME Cloning Software/Hardware AlexRom 5 1,552 09-02-2022, 15:43 PM
Last Post: Enabled
XZBMW Which Hardware for BMW Scanner AC31991 2 565 15-10-2019, 17:41 PM
Last Post: LBDT
0Dash Recommended Hardware for Flash some ECU‘s Die_Kalinke 2 706 04-08-2019, 16:56 PM
Last Post: Die_Kalinke

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content