[1 6 D]

Hi,

I was retrofitting CCS to 2017 Seat Ibiza and After coding ECU and BCM. Now I have wrong coding fault in ECU

Modules from car:
Address 01: Engine (J623-CJZC)       Labels: 04E-907-309-V1.clb
   Part No SW: 04E 906 027 BB    HW: 04E 907 309 AF
   Component: R4 1.2l TFS   X23 9085  
   Revision: R4X23---    
   Coding: 01110012230410080000
   Shop #: WSC 92521 052 00000
   ASAM Dataset: EV_ECM12TFS01104E906027BB 001009
   ROD: EV_ECM12TFS01104E906027BB.rod


Address 09: Cent. Elect. (J519)       Labels: 6C0-937-089-V1.clb
   Part No SW: 6C0 937 089 D    HW: 6C0 937 089 
   Component: BCM PQ26 Hi4R H10 0094  
   Serial number: 006308009680
   Coding: 080008404053005B4B844000400703400000680051010000000000000000
   Shop #: WSC 131071 1023 2097151
   ASAM Dataset: EV_BCMA0 006002
   ROD: EV_BCMA0_006_SE26.rod



In ECU I changed coding like VCDS LC Helper said, in BCM I checked byte18bit0 like on thread from RT forum. In measuring blocks I see that after turning switch ON, cancel switch is all time operated, pressing +, BCM see deccellerate. pressing - see accelerate

After changing pins 28 and 52 BCM see on + accelerate and on - deccelerate. Wiring diagram is from ELSA 2016 for Polo 6C. Maybe somebody have any idea what should be changed?

[Kozik20l]

Hello, was the problem solved? I have the same

[kulacska84]

Swap code. just seat service.

[Kozik20l]

Cruise control has been activated by the purchased swap. the problem is that with the advent of cruise control, all the time vcds shows the pressed cancel, the second handle the same, and in the engine driver the fault from the shift pad if you attach the cruise control

---

The car is Skoda Rapid 2015

[1 6 D]

Anybody here can help with online activation?