Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Sid803 Ford Expert needed
29-05-2019, 17:48 PM,
Post: #1
|
|||
|
|||
Sid803 Ford Expert needed
Hello guys,
I have a big problem with my 2005 Ford Focus C-max 2.0 diesel sid803 i bought 2 months ago. When i bought the car i noticed that it had several problems, the fuel gauge did not work, there were several dtc regarding brake lights, the car had and hotstart issue and a lot of black smoke from what i believe was a bad chiptuning attempt. Bought a fvdi j2534 , installed Ford IDS 113, downloaded the calibration files from this forum and tried to do a pcm reprogramming. I started the process, it detected that there is a newer version for the ecu software , click next ...and it started deleting the files from the PCM then it gave me and error(the operation cannot begin because the pcm failed to complete a service procedure. Perform PMI on the pcm to resolve the issue). I tried to perform PMI but with no success because IDS doesn t recognize the PCM anymore. Connected with galetto but in the identification screen is only scrambled data. Can this PCM be saved by full bdm write, should i buy one from the scrap and try to perform PMI with the same fvdi j2534? Thank you for your time P.S the fuel indicator works fine now) |
|||
30-05-2019, 07:57 AM,
Post: #2
|
|||
|
|||
RE: Sid803 Ford Expert needed
(29-05-2019, 17:48 PM)catablu Wrote: Hello guys, hi read full bdm if possible,and wee will see what the damage is flasch or eprom dpf egr dtc off adblue glowplug limp mode off. ford volvo edc16c34 available me email [email protected]
|
|||
30-05-2019, 19:57 PM,
Post: #3
|
|||
|
|||
RE: Sid803 Ford Expert needed
hi read full bdm if possible,and wee will see what the damage is flasch or eprom
[/quote] MPC chip is fried, i cannot read bdm. I will try to read the eeprom. Can someone recommend a good VCM china clone who can support good pcm and module reprogramming ? Thanks |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
ford dcm3.5 | junnnior | 4 | 50 |
3 hours ago Last Post: junnnior |
|
2018 ford transit sid209 adblue , dpf , dtc off | hicazkar | 1 | 26 |
Yesterday, 05:01 AM Last Post: huzefa |
|
Need original for ford sid211 | Dieselhack | 2 | 36 |
15-05-2024, 06:46 AM Last Post: Dieselhack |
|
please clear dpf and egr sid 206 ford cmax | jeam | 3 | 41 |
14-05-2024, 18:30 PM Last Post: mefistofilos |
|
Ford Transit 2.2TDCI 2012 SID208 egr off | anour10 | 3 | 46 |
13-05-2024, 21:44 PM Last Post: anour10 |
|
ford mondeo 2004 dtcs off | gafari | 0 | 21 |
13-05-2024, 17:15 PM Last Post: gafari |
|
ford mondeo mk4 1.8 tdci i need stage 1 | mazioallegro | 1 | 40 |
13-05-2024, 12:54 PM Last Post: pistolo30 |
|
VW Passat 2.0 tdi 103 kW file tuning needed | zijad77 | 1 | 43 |
12-05-2024, 12:32 PM Last Post: Hazerssmurf |
|
307 2.0HDI SID803 DTC remove | Samsara69 | 5 | 119 |
12-05-2024, 06:24 AM Last Post: Samsara69 |
|
Peugeot Expert 2.0hdi need egr off | guciek | 1 | 36 |
10-05-2024, 09:24 AM Last Post: Antoniommpp |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content