ATTENTION !! Users which have not any posts were deleted !
  1. New Emulator

  2. Julie Emulator

  3. Immo Bypass

  4. AUTO-CHIPS

  5. HEXPROG

  6. moe diatronik



Orange5 Clone [Support/Feedback/Rework/Calculators]
13-10-2020, 19:48 PM,
Post: #131
RE: Orange5 Clone [Support/Feedback/Rework/Calculators]
so i'm not so happy with orange 5, it does not work as i would expect (v1.34)

is there any rework that can be done?
Quote this message in a reply
13-10-2020, 20:08 PM,
Post: #132
RE: Orange5 Clone [Support/Feedback/Rework/Calculators]
(13-10-2020, 19:48 PM)victorysatgr Wrote:  so i'm not so happy with orange 5, it does not work as i would expect (v1.34)

is there any rework that can be done?

what exactly not work?
Quote this message in a reply
10-11-2020, 16:26 PM,
Post: #133
RE: Orange5 Clone [Support/Feedback/Rework/Calculators]
Hi,
I am thinking to buy an orange 5 programmer but i am in doubt about the version that i shoul buy because i dont find so much information about the diference beteen the versions. Does anyone know if the newest 1.36 version works good ? Beacause the diference on the price from 1.34 is not significant so i not very confidant that it works fine like 1.34.
Thanks
Quote this message in a reply
17-11-2020, 09:14 AM,
Post: #134
RE: Orange5 Clone [Support/Feedback/Rework/Calculators]
best place to buy eeprom clips to read in circuit? some good quality ones?
Quote this message in a reply
17-11-2020, 19:36 PM, (This post was last modified: 17-11-2020, 21:07 PM by Clusters.)
Post: #135
RE: Orange5 Clone [Support/Feedback/Rework/Calculators]
(17-11-2020, 09:14 AM)JIMMYQ Wrote:  best place to buy eeprom clips to read in circuit? some good quality ones?

Not China  rolling
Buy ORIGINAL Pomona
ECUVONIX, TME.EU, FARNELL,....


Attached Files
links.txt
File Type: .txt
Downloaded: 82 times
Size: 209 bytes


KTAG 7.026 EU - KESS 5.017/2.47 EU - MPPS V18 EU - FGTECH EU
XCAN CLONE - CARPROG REWORKED - VCDS/OPCOM HQ - KESS/KTAG REWORKED
BDM ADAPTERS - BDM/BOOTFRAME HQ - BOOTPINS AND MANY MORE

>>"CONNECTION WIZARD" OBD BREAKOUT BOX WITH INTEGRATED COIL<<
ASK ME IN PM FOR INFOS AND SPECIAL PRICES
Quote this message in a reply
[-] The following 1 user says Thank You to 23Andi23 for this post:
  • raffy haddad
23-12-2020, 19:44 PM,
Post: #136
RE: Orange5 Clone [Support/Feedback/Rework/Calculators]
I'm interessed too in any info about new chinese v1.36. The price is strange down. Almost half of price for v1.35. Chinese still sale v1.34 & v1.35 & v1.36. Any attempt to obtain true info about v1.36 from sellers is hopeless.
If someone hawe any experiences, good or bad, with v1.36, please let us know.
Quote this message in a reply
23-12-2020, 20:01 PM,
Post: #137
RE: Orange5 Clone [Support/Feedback/Rework/Calculators]
hi, i buy 1.36 few weeks ago,

programming Motorola HC08 very good.

Orange5 software info print "Orange5 Version 1.36" but i don't know if support more ECUs as 1.34
Quote this message in a reply
[-] The following 1 user says Thank You to stromer for this post:
  • ady2006
19-01-2021, 19:00 PM,
Post: #138
RE: Orange5 Clone [Support/Feedback/Rework/Calculators]
Orange 3/4/5 changes after v1.34 r2 03/16/2016
(Google translation)

v1.35 24.06.2016
--------------------
[+] Improved block write error handling.
[*]Correct definition of password for R8C large size FLASH from firmware.
[+] Enabling the protocol window via the menu.
[+] Display of rectangular bodies in pin
[+] On the graphic memory card, display of the selected blocks (button 'M')
[+] The maximum number of BACKUP files has been increased, automatic generation of diz descriptions has been added.
[+] Orange5 - for 9S12XE added function of automatic calculation of D-FLASH size.
[+] Orange5 - Renesas configuration moved to a separate 4-Renesas
[+] Orange5 - content of 3-CarRadio configuration moved to 5-Special_O5

v1.35 20.12.2016 Only for Orange5
----------------------------------------
[+] Updating modules
[+] The list of supported microcircuits has been expanded

v1.35r1 05/31/2017 Only for Orange5
------------------------------------------
[+] Updating modules
[+] The list of supported microcircuits has been expanded
[+] Corrections and additions to the files the location of the pins of microcircuits

v1.35r2 24.12.2017 Only for Orange5
------------------------------------------
[+] Updating modules
[+] The list of supported microcircuits has been expanded
[+] Corrections and additions to the files the location of the pins of microcircuits
[+] Editor: Ctrl + Q - go to the next selected block
[+] Log window: Ctrl + A - select all

v1.36 03/10/2020 Only for Orange5
----------------------------------------
[+] Updating modules
[+] The list of supported microcircuits has been expanded
[+] Corrections and additions to the files the location of the microcircuit pins
[+] Corrections for extended fields of S-19 files
[+] Support for .mhx files
[+] New command "LOG" in hpl
[+] Improved M08V algorithm

br
Quote this message in a reply
18-03-2021, 16:38 PM,
Post: #139
RE: Orange5 Clone [Support/Feedback/Rework/Calculators]
Hello. who can share the komatsu engine hours meter calculator
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
PPeugeot clone continental vd56.1 sonho1999 0 46 Yesterday, 17:41 PM
Last Post: sonho1999
0Dash X-tool suppot/Feedback/backup thread volavka 262 110,099 08-04-2021, 10:46 AM
Last Post: skens
0Dash New CLONE Smelecom DSP3 feedback forkade 20 13,143 16-03-2021, 12:01 PM
Last Post: krisgadom
0Dash IProg+ & IProgPro suppot/Feedback thread volavka 171 113,071 16-02-2021, 19:00 PM
Last Post: al70
0Dash Smok UHDS Support/Feedback/Backup Thread volavka 150 55,626 16-01-2021, 14:17 PM
Last Post: paradise_garage
0Dash X-100 PRO Mileage Correction FeedBack ETPerformance 244 121,412 23-10-2020, 18:39 PM
Last Post: doot47
0Dash MTool Mileage Correction suppot/Feedback thread volavka 60 40,955 13-10-2020, 21:33 PM
Last Post: claudio35
ZVW Clone vw fox dash bighomer46 3 1,473 12-07-2020, 19:35 PM
Last Post: bighomer46
ZTAudi Solved Help. How to clone gateway audi a6 ruisam 2 1,425 03-07-2020, 00:23 AM
Last Post: ruisam
0Dash MT401 experience feedback zgjana 49 20,389 03-04-2020, 05:32 AM
Last Post: maneesh

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content