[budddyyy]

hey, bmw f10 year 2010 has camera in windows for sli from factory , now wheel was changed with vibrations and paddles.

paddles works good after 2tb and coding.

after that the lane hold assist was coding it works good in cluster but the wheel dont has vibrations.

i have read about that and many people  says that 2 wires must from SZL to JBE
but other peoples says that a different SZL is needed. for free places for the wires.

now the question is, it is enough when i only connect 2 wires? or is there more to work that  the vbratiosn will work?

thanks in advance for any help

[DayvG]

hey, bmw f10 year 2010 has camera in windows for sli from factory , now wheel was changed with vibrations and paddles.

paddles works good after 2tb and coding.

after that the lane hold assist was coding it works good in cluster but the wheel dont has vibrations.

i have read about that and many people says that 2 wires must from SZL to JBE
but other peoples says that a different SZL is needed. for free places for the wires.

now the question is, it is enough when i only connect 2 wires? or is there more to work that the vbratiosn will work?

thanks in advance for any help

Do you still need help with this?

[budddyyy]

yes help for this was nice

[DayvG]

I recently finished this on my F10, I had bought a new SZL as I wanted the HBA button on the stalk. You need to run 2 wires from JBE to the SZL. As I had the new SZL I just ran the wires to the connector as per ISTA. The hardest part is getting to the front fuse panel to get the power connected correctly. The ground is easily connected to a position on the JBE. I couldn’t get to fuse 24 as there is nowhere to actually connect the connector/wire, I chose fuse 4 as it is un occupied.