[claw]

HI,

F20 with VO code 663, like this car, has a iDrive controller from OEM.
By the way, F series cars need to flash ICOM (ISTA D) or Enet Cable (ESys).


Thorsten

Flashing is only with icom

If using ista-d.
 You can use ENET to flash, with ESYS, as said above.

[Thorsten]

HI,

F20 with VO code 663, like this car, has a iDrive controller from OEM.
By the way, F series cars need to flash ICOM (ISTA D) or Enet Cable (ESys).


Thorsten

Flashing is only with icom

HI,

this car is F series, right?
Then again:
need to flash ICOM (ISTA D) or Enet Cable (ESys)


Thorsten

[koulga]

Hi and big thanks to all.

If I understand correctly, I can reflash myself with Esys!

I have Esys with ENET but I have never used Esys, Someone could explain to me or send me a tutorial well explained in detail to throw me in with more confidence not to crash my car?

[PsevDo]

Hi and big thanks to all.

If I understand correctly, I can reflash myself with Esys!

I have Esys with ENET but I have never used Esys, Someone could explain to me or send me a tutorial well explained in detail to throw me in with more confidence not to crash my car?

1.Need to have full pszdata full in esys folder, or it can be linked to ista+ folder.
2. must to have good power supply, on car must be always 13.5-14v
3. better flash with icom, because flashing with enet is dangerous, because if connection will be lost between lan cable ant laptop, you will get error. flashing with icom is more stable, because all data from yours pc is loaded to icom(icom have ram inside) and when are loaded to car.
4. flashing instructions atached.