Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
No CID Voltage from ID6 EVO
04-06-2019, 08:59 AM,
Post: #1
|
|||
|
|||
No CID Voltage from ID6 EVO
Hi Guys,
Has anyone experienced faults with NBT EVO units failing with no 12v output to the CID? I have a wk35/17 ID6 Unit with DAB & GPS which has been working fine for over 6 months & now the screen doesn't turn on, tested CID & Cable & it seems there is no CID 12v output, If I provide a separate 12v feed to the CID it powers up & works fine. Are there any companies that repair these units? Any help is greatly appreciated. |
|||
04-06-2019, 17:19 PM,
Post: #2
|
|||
|
|||
RE: No CID Voltage from ID6 EVO
There is a little fuse on the PCB right under the screen connector. Replace it if it's broken (continuity test failed).
FSCMap -> FemtoEVO
portal.femtoevo.com online geration VO/FA by VIN, FSC sets, MGU ViM , FSC for Map Updates ROUTE / EVO / CIC / CHAMP / NBT MD1/MG1 06.2020+ DME unlocking services. 1CR Enable for 06.2020+ EU cars (G series, petrol/DIESEL - RU only). NCD sign for coding 2.0 for selected portal users. instagram: @femtoevo |
|||
04-06-2019, 17:52 PM,
Post: #3
|
|||
|
|||
RE: No CID Voltage from ID6 EVO
Many thanks for the reply, I will check that, is it this one shown in the attached picture?
|
|||
05-06-2019, 06:05 AM,
Post: #4
|
|||
|
|||
RE: No CID Voltage from ID6 EVO
|
|||
05-06-2019, 06:59 AM,
(This post was last modified: 05-06-2019, 07:00 AM by FSCmap.)
Post: #5
|
|||
|
|||
RE: No CID Voltage from ID6 EVO
(04-06-2019, 17:52 PM)mcrussell Wrote: Many thanks for the reply, I will check that, is it this one shown in the attached picture? Yes it is. Rating is unknown, screen consumption is about 250mA, I think fuse should be rated around 500mA. FSCMap -> FemtoEVO
portal.femtoevo.com online geration VO/FA by VIN, FSC sets, MGU ViM , FSC for Map Updates ROUTE / EVO / CIC / CHAMP / NBT MD1/MG1 06.2020+ DME unlocking services. 1CR Enable for 06.2020+ EU cars (G series, petrol/DIESEL - RU only). NCD sign for coding 2.0 for selected portal users. instagram: @femtoevo |
|||
05-06-2019, 07:03 AM,
Post: #6
|
|||
|
|||
RE: No CID Voltage from ID6 EVO
Thanks for the update, I was looking at around a 5A fuse going off the fuse rating the older CIC CID's used to use when they had their own power supply.
I will search for some 500mA you time is really appreciated |
|||
05-06-2019, 07:33 AM,
Post: #7
|
|||
|
|||
RE: No CID Voltage from ID6 EVO
(05-06-2019, 07:03 AM)mcrussell Wrote: Thanks for the update, I was looking at around a 5A fuse going off the fuse rating the older CIC CID's used to use when they had their own power supply. There is no fuse. There is couple of capacitors. Just check that they are short circuit and then desolder both. BMW tuning & retrofitting, https://www.instagram.com/cebepspb/
* lifetime EVO, ROUTE codes, Carplay, ECU Remap and other crap |
|||
05-06-2019, 07:42 AM,
Post: #8
|
|||
|
|||
RE: No CID Voltage from ID6 EVO
(05-06-2019, 07:33 AM)CEBEP Wrote:(05-06-2019, 07:03 AM)mcrussell Wrote: Thanks for the update, I was looking at around a 5A fuse going off the fuse rating the older CIC CID's used to use when they had their own power supply. You don't have a picture available do you? |
|||
05-06-2019, 08:18 AM,
Post: #9
|
|||
|
|||
RE: No CID Voltage from ID6 EVO
(05-06-2019, 07:42 AM)mcrussell Wrote:(05-06-2019, 07:33 AM)CEBEP Wrote:(05-06-2019, 07:03 AM)mcrussell Wrote: Thanks for the update, I was looking at around a 5A fuse going off the fuse rating the older CIC CID's used to use when they had their own power supply. Sure I have. BMW tuning & retrofitting, https://www.instagram.com/cebepspb/
* lifetime EVO, ROUTE codes, Carplay, ECU Remap and other crap |
|||
05-06-2019, 12:24 PM,
Post: #10
|
|||
|
|||
RE: No CID Voltage from ID6 EVO
Would you be able to upload a close up at all please?
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Ultimate Ediabas/ISTA+ voltage control V3 | Node | 322 | 122,613 |
24-03-2024, 23:45 PM Last Post: armenh7 |
|
BMW e91 320D 163 hp drop charge voltage | aidasystemsbg | 12 | 444 |
05-01-2024, 19:31 PM Last Post: jaki |
|
Did some handiwork, ENET cable with voltage display | rocdeng | 1 | 428 |
13-10-2023, 12:48 PM Last Post: OneKillaWatt |
|
CID output voltage. mini f56. | Jalami | 3 | 381 |
21-09-2023, 09:05 AM Last Post: megalo84 |
|
KL15 voltage Icom | VroomVroom | 1 | 253 |
17-09-2023, 20:46 PM Last Post: Esysx |
|
F30 fem supply voltage to TMS error | kklobo | 4 | 528 |
15-09-2023, 17:03 PM Last Post: kklobo |
|
ISTA+ Voltage Controll | Astitune | 0 | 300 |
25-08-2023, 11:35 AM Last Post: Astitune |
|
BMW I3 HIGH VOLTAGE BATTERY PROBLEM | tokarzm | 7 | 923 |
29-07-2023, 06:47 AM Last Post: schaeublew |
|
Solved ✔ ISTA voltage control | Fps | 5 | 581 |
02-07-2023, 16:10 PM Last Post: Fps |
|
BMW 750i Active Hybrid High Voltage battery repair | jonazizbey | 4 | 1,103 |
17-04-2023, 13:06 PM Last Post: larshutten |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content