Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
kess v2 clone simos 18.1 checksum problems
05-06-2019, 15:36 PM,
Post: #1
|
|||
|
|||
kess v2 clone simos 18.1 checksum problems
Greetings,
i have a kess v2 v5.017 china clone. Now this kess supports simos 18/simos18.1, simos 12 ect.. the only problem i keep having is i get a checksum error when choosing the file i would like to write. i can read the id of the ecu but no writing or recovery. Every other ecu works, only the new simos ones are a bit weard. does anyone of you have a solution for this? i installed a new visual studio, tryed another kess program, still same problem. i hope someone can help me thanks kind regards |
|||
11-06-2019, 11:24 AM,
Post: #2
|
|||
|
|||
RE: kess v2 clone simos 18.1 checksum problems
file size is the problem
|
|||
14-06-2019, 17:39 PM,
Post: #3
|
|||
|
|||
RE: kess v2 clone simos 18.1 checksum problems
|
|||
18-06-2019, 22:40 PM,
(This post was last modified: 18-06-2019, 23:10 PM by Clusters.)
Post: #4
|
|||
|
|||
RE: kess v2 clone simos 18.1 checksum problems
Hi, have you tried changing the ksuite dll for kess 5017?
Rule 3: Do not Post Links on the Board! External links must be attached in a notepad file. Thanks, Admin Like this |