Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F20 Touch CID
06-06-2019, 19:28 PM,
Post: #1
|
|||
|
|||
F20 Touch CID
Hi
I have a F20 LC1 (BY 7/2015) VIN P822656 with a ID4 Unit and change soon to a ID5/6 Unit. Maybe with a 8.8 Touch CID. But i find the Touch CID only with a different back case. Had someone fit a touch cid to a F20 with the old dashboard? Thanks Marc |
|||
06-06-2019, 19:35 PM,
Post: #2
|
|||
|
|||
RE: F20 Touch CID
(06-06-2019, 19:28 PM)Gecko.ch Wrote: Hi Yes, I've done that, you can disassemble the back case from the old CID to touch CID. |
|||
06-06-2019, 19:44 PM,
Post: #3
|
|||
|
|||
RE: F20 Touch CID
(06-06-2019, 19:35 PM)simonchs Wrote:(06-06-2019, 19:28 PM)Gecko.ch Wrote: Hi Ok. Its difficult to broke something, and you changed only the backe case. The front not? |
|||
06-06-2019, 22:31 PM,
Post: #4
|
|||
|
|||
RE: F20 Touch CID
(06-06-2019, 19:44 PM)Gecko.ch Wrote:(06-06-2019, 19:35 PM)simonchs Wrote:(06-06-2019, 19:28 PM)Gecko.ch Wrote: Hi Yes, the back cover only. And laminating a layer of carbon fiber. |
|||
09-06-2019, 20:16 PM,
Post: #5
|
|||
|
|||
RE: F20 Touch CID
which things ive to code for get that workin?
|
|||
18-07-2019, 07:55 AM,
Post: #6
|
|||
|
|||
RE: F20 Touch CID
(06-06-2019, 22:31 PM)simonchs Wrote:(06-06-2019, 19:44 PM)Gecko.ch Wrote:(06-06-2019, 19:35 PM)simonchs Wrote:(06-06-2019, 19:28 PM)Gecko.ch Wrote: Hi I tried that but the cover of the NBT CID doesn't fit on the Evo CID. How did you do that? You changed/cutted something? |
|||
18-07-2019, 08:44 AM,
Post: #7
|
|||
|
|||
RE: F20 Touch CID
(18-07-2019, 07:55 AM)blax123 Wrote:(06-06-2019, 22:31 PM)simonchs Wrote:(06-06-2019, 19:44 PM)Gecko.ch Wrote:(06-06-2019, 19:35 PM)simonchs Wrote:(06-06-2019, 19:28 PM)Gecko.ch Wrote: Hi Hello. Yes, I had to realize that too. i have mount the original back from the touch cid, with not cut etc. ist ok, if you look from the windshild, you see a little bit from the cable, but ist ok. |
|||
18-07-2019, 09:03 AM,
(This post was last modified: 18-07-2019, 09:05 AM by tste1982.)
Post: #8
|
|||
|
|||
RE: F20 Touch CID
does the touch cid work with an id4 evo? how to code that?
when i connect it it only shows no signal. ISTA 4.46.14, ISTA 4.46.11 SDP, ISTA-P 72.0, ISTA Launcher 1.46
E-Sys Launcher Pro 5.2.4 with E-Sys 22.10 Lenovo P14s |
|||
18-07-2019, 09:23 AM,
Post: #9
|
|||
|
|||
RE: F20 Touch CID
no, the touch functionality dont work with id4. i have replaced my unit with a id6 unit.
the no signal issue comes becomes of a different voltage output. |
|||
18-07-2019, 16:14 PM,
Post: #10
|
|||
|
|||
RE: F20 Touch CID
is it possible to code the right voltage, that the display works without touch?
ISTA 4.46.14, ISTA 4.46.11 SDP, ISTA-P 72.0, ISTA Launcher 1.46
E-Sys Launcher Pro 5.2.4 with E-Sys 22.10 Lenovo P14s |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Touch Command Service Updater | Skept | 11 | 1,852 |
12-03-2024, 18:56 PM Last Post: mdomel |
|
APIX1 screen with touch ? | oros | 1 | 195 |
25-02-2024, 19:03 PM Last Post: zero9 |
|
G12 touch screen in F10 apix1 enclosure ? | RomeyRome | 8 | 1,129 |
19-01-2024, 19:19 PM Last Post: Mwahab |
|
Solved ✔ Touch command closing blinds | Buntyk | 3 | 282 |
15-11-2023, 17:36 PM Last Post: Buntyk |
|
NBT EVO touch support | brag288 | 2 | 377 |
06-07-2023, 17:03 PM Last Post: brag288 |
|
G12 Touch Command tablet | Buntyk | 6 | 619 |
07-05-2023, 15:14 PM Last Post: Node |
|
BMW Touch command using for another Vehicle | navid | 9 | 1,026 |
19-11-2022, 08:25 AM Last Post: Zenel6GT |
|
Touch Command Service Updater | Skept | 2 | 457 |
17-10-2022, 20:11 PM Last Post: Skept |
|
Updating Touch Command G12 Software | navid | 2 | 444 |
13-09-2022, 17:53 PM Last Post: jb2005 |
|
BMW Touch Command Service Updater TCSU - EVO | Napas | 0 | 377 |
29-08-2022, 21:02 PM Last Post: Napas |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content