[Gecko.ch]

Im not sure. But a id4 unit cant code the voltage output for a newer apix2 cid. You must have a external voltage regulator.

[simonchs]

Hi
I have a F20 LC1 (BY 7/2015) VIN P822656 with a ID4 Unit and change soon to a ID5/6 Unit. 
Maybe with a 8.8 Touch CID. 
But i find the Touch CID only with a different back case. 
Had someone fit a touch cid to a F20 with the old dashboard?

Thanks
Marc

Yes, I've done that, you can disassemble the back case from the old CID to touch CID.

Ok. Its difficult to broke something, and you changed only the backe case. The front not?

Yes, the back cover only. And laminating a layer of carbon fiber. 

I tried that but the cover of the NBT CID doesn't fit on the Evo CID. How did you do that? You changed/cutted something?

Yes, the clips are not direct fitted, need to cut the clips and I’ve welded the screen and back cover with ribbon sealer.

[tste1982]

Im not sure. But a id4 unit cant code the voltage output for a newer apix2 cid. You must have a external voltage regulator.

the new touch cid shows no signal and the old nbt cid needs a voltage regulator to work too on my id4? that’s weird.