[Extcy]

Trying for a while, no luck

What you search is here

7686A in your File


Linearisierungskennlinie für Kraftstoffdrucksensor (4x1)

(Rohwert des Raildrucks)/bar

        mV            
 -      0.0    300.0    3000.0    3300.0
 -      0       0.0        2200.0    2210.0




Rep + Thx are allways nice when my post was helpful

[Trys2penki]

again, its not that.. guys. Its only rail sensor linearization map. 

I need to change pwm to  rail regulator and flow valve. they stay between 40 - 60%, no matter that rail pressure going more than requested......
car stalls without rail going more thant 2200 bar, it stalls even if request is 1600 bar, and actual rail is 1800 bar under the load.

And for linearization. I believ its impossible to put 5v 2700bar sensor in this car?

[esm1r]

if you have damos, try to find PCV.
Also, if is different pressure sensor than orginal, you need to change voltage of sensor

[Trys2penki]

pressure sensor is the same... Problem is not the limit of sensor