Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Unable to update cars software via ISTA+
09-06-2019, 12:45 PM,
Post: #1
|
|||
|
|||
Unable to update cars software via ISTA+
Hi there, new member here so bare with me if I'm asking some dull questions.
I've used ISTA+ to diagnose a few issues and have sorted them too. I've also used eSys before for coding and retrofitting cruise control so I'm not a complete novice. The problem I have is that I have the message 'The programming system could not be initialised. The ISTA installation may be damaged or incorrectly configured. Reinstall ISTA. If problems persist, contact local support.' I'm using version 4.17.31 and I'm connecting using an ENET cable. All I want to do is update the software of the car. What do I need to do to get this working as the option to update software is also greyed out? Thanks |
|||
09-06-2019, 13:10 PM,
Post: #2
|
|||
|
|||
RE: Unable to update cars software via ISTA+
Do you have full SDP in Rheingold/PSdZ/data_swi? It should be around 160GB.
Only BMW services:
Remote coding/programming - E, F, G serie HDD change, Carplay, Screen mirroring activation FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS Remote reset 8HP ISN F serie ELV disable for CAS3, 3+ |
|||
10-06-2019, 07:31 AM,
Post: #3
|
|||
|
|||
RE: Unable to update cars software via ISTA+
In addition to SDP, Enet cable? without reconfiguring ista.gui? No chance!
|
|||
10-06-2019, 08:16 AM,
Post: #4
|
|||
|
|||
RE: Unable to update cars software via ISTA+
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content