Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
1999 BMW E38 740i Retrofitiing E39 M5 / E53 X5 4.6/4.8 Cluster
10-06-2019, 15:41 PM,
Post: #1
|
|||
|
|||
1999 BMW E38 740i Retrofitiing E39 M5 / E53 X5 4.6/4.8 Cluster
Good Afternoon,
I have had a strange request from a friend. He has the above vehicle and is looking at retroffiting a new cluster to it. He has been told it is plug and play but the rev counter LED and Oil temperature gauge will need programming in. Does anyone know what coding steps are needed for this? Thanks |
|||
10-06-2019, 19:07 PM,
(This post was last modified: 10-06-2019, 19:08 PM by FSCmap.)
Post: #2
|
|||
|
|||
RE: 1999 BMW E38 740i Retrofitiing E39 M5 / E53 X5 4.6/4.8 Cluster
Oil temp comes from DME via CAN bus, but it's available only with 4.6/4.8L engine.
FSCMap -> FemtoEVO
portal.femtoevo.com online geration VO/FA by VIN, FSC sets, MGU ViM , FSC for Map Updates ROUTE / EVO / CIC / CHAMP / NBT MD1/MG1 06.2020+ DME unlocking services. 1CR Enable for 06.2020+ EU cars (G series, petrol/DIESEL - RU only). NCD sign for coding 2.0 for selected portal users. instagram: @femtoevo |
|||
Reputation: +1 - rana [+1] | |||
10-06-2019, 21:19 PM,
Post: #3
|
|||
|
|||
RE: 1999 BMW E38 740i Retrofitiing E39 M5 / E53 X5 4.6/4.8 Cluster
(10-06-2019, 19:07 PM)FSCmap Wrote: Oil temp comes from DME via CAN bus, but it's available only with 4.6/4.8L engine. Some people have managed to get this working on other forums but no one has put up a DIY in relation to doing this. I will let my friend know what you have said. Thank you for your help. |
|||
11-06-2019, 05:18 AM,
Post: #4
|
|||
|
|||
RE: 1999 BMW E38 740i Retrofitiing E39 M5 / E53 X5 4.6/4.8 Cluster
|
|||
11-06-2019, 07:02 AM,
Post: #5
|
|||
|
|||
RE: 1999 BMW E38 740i Retrofitiing E39 M5 / E53 X5 4.6/4.8 Cluster
(11-06-2019, 05:18 AM)cursor Wrote:It's better to use compatible (but not so fancy) instrument cluster rather than having incompatible software running on your engine. IMHO.(10-06-2019, 19:07 PM)FSCmap Wrote: Oil temp comes from DME via CAN bus, but it's available only with 4.6/4.8L engine.How about flashing 4.4 DME with 4.6 software? FSCMap -> FemtoEVO
portal.femtoevo.com online geration VO/FA by VIN, FSC sets, MGU ViM , FSC for Map Updates ROUTE / EVO / CIC / CHAMP / NBT MD1/MG1 06.2020+ DME unlocking services. 1CR Enable for 06.2020+ EU cars (G series, petrol/DIESEL - RU only). NCD sign for coding 2.0 for selected portal users. instagram: @femtoevo |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content