[Amerocanada]

Hi friends,
Mercedes ML270 2001 2.7cdi
has been removed Inlet Swirl Flaps. Now got error P1189 M55, and need to fix it.
ECU Bosch HW: 0281010796 (SW: 1037351671) ED0038 CR2.14 2.7L
File from ecu read by KESS

[loki954]

here you go, please report after test 

[Amerocanada]

here you go, please report after test 

Hi, there is no more mistake P1189, but still in limp mode.

[Amerocanada]

here you go, please report after test 

could you check if everything good removed?

[loki954]

the file is ok, you need to find other problems....vacuum....maf.....
try this file but will not work as well, because you have other problem

[Amerocanada]

the file is ok, you need to find other problems....vacuum....maf.....
try this file but will not work as well, because you have other problem

Thanks for your help!
The first file was correct, it is my mistake - mechanic did not disconnect flaps engine M55, after disconnecting everything is good!
Problem is solved!