[predatortje]

Hi everyone,

I've just bought an audi a3 1.8 tfsi sportback 2013 with MMI navi high P europe 2016 maps and
MMI firmware version MHIG_EU_AU_K0337_1

i found on another forum the newest firmware but i'm afraid to load it into the unit without any feedback on it.
see attachement for the link. 

Can aynone help me with the firmware and newest 2019 maps?

[congo11]

Firmware it's self is ok.
But if you load the newest maps there is very good chance that the map will be blocked if you dont get the proper licence key for that.

[predatortje]

Firmware it's self is ok.
But if you load the newest maps there is very good chance that the map will be blocked if you dont get the proper licence key for that.

Ok, so this firmware i posted will not brick the unit? or will this firmware give some errors?

[mrbla]

This will properly not work. Your unit is on K-Trunk (so firmware for rework and dealer) and the linked firmware is from P-Trunk (Firmware which is loaded in production). Once the unit is on K it is hard to get back to P. At least not for normal people.

[ayrtonoc]

Same "R" and "K" logic is applyed for old RMC units??
I've loaded a newer "P16432" over an old "P1432B" and an error 01043 has been thrown out...
But any idea where i can find a K16432 download??