Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F10 535i problems
23-06-2019, 14:39 PM,
(This post was last modified: 23-06-2019, 16:26 PM by haty.)
Post: #1
|
|||
|
|||
F10 535i problems
hi guys ...i have a relative with an f10 535i , he is having many problems lately.
the car on heavy load cuts out and goes to limp mode(drivetrain error on navi) . ista gave back misfire on cylinder 4 and air mass not plausible ,and second time air mass too high. the mechanic changed all 6 injectors and the 6 ignition coils .....and found a tuning box on the car ..removed it but still runs the same. the turbo seems ok. what you suggest ? |
|||
23-06-2019, 14:49 PM,
Post: #2
|
|||
|
|||
RE: F10 535i problems
Frankly - find a better mechanic There are tests one can do to check various things on a car before blinding replacing them.
|
|||
23-06-2019, 16:27 PM,
Post: #3
|
|||
|
|||
RE: F10 535i problems
yes i know ....he lives very far from me so i can not help doing diagnostics......i suppose it's high pressure fuel pump...cause on full throttle goes always in limp mode
|
|||
23-06-2019, 17:21 PM,
Post: #4
|
|||
|
|||
RE: F10 535i problems
Diagnosing from a distance is always difficult. Does he have ISTA? I would want to verify that the injectors were coded properly, check again for BMW diagnostic codes, then do data logging while he replicates the issue.
HPFP issues are not common on the N55, and I would expect to see a code if that were the problem. The air mass not plausible could indicate a bad MAF sensor, though I would also want to smoke test for leaks. Data logging would help to diagnose a fuel pump or MAF issue. It might be worth checking spark plugs and gap. |
|||
24-06-2019, 05:57 AM,
Post: #5
|
|||
|
|||
RE: F10 535i problems
Airmass too high might mean the dme is injecting what it thinks should match air as measured by MAF but O2 sensors reporting lean mix!! Thus system reports it is getting too much air compared to what the meter (MAF) is telling it.
So the problem is a lean condition in the exhaust gases so possible issues 1. Inaccurate MAF 2. Air leak 3. Worn valvetronic shaft 4. Inaccurate O2 sensors 5. worn injectors (unlikely because when they wear they fuel too much, not too little) You need to read the lambdas at idle and lambda adaptations to see what the O2 sensors are reporting then move on from there. |
|||
24-06-2019, 08:09 AM,
Post: #6
|
|||
|
|||
RE: F10 535i problems
You might want to take a look at the intake valves. It’s common to build up carbon on the valves.
|
|||
24-06-2019, 19:43 PM,
Post: #7
|
|||
|
|||
RE: F10 535i problems
implausible or too high error of mass air sensor are same errors which indicate a malfunction in n55 management mevd172y as it compares the air measured by sensor with calculated by throttle valve and to somehow valvetronic.from here you should start
|
|||
25-06-2019, 09:31 AM,
Post: #8
|
|||
|
|||
RE: F10 535i problems
ok ..will report back with the progress
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
ISTA 4.46.xx problems and possible solution | Sedoy | 97 | 11,511 |
Yesterday, 11:38 AM Last Post: vld |
|
CIC-MID fsc problems | ayllon308 | 0 | 119 |
08-02-2024, 21:25 PM Last Post: ayllon308 |
|
Solved ✔ F10 535i engine power loss 15mph, DME issue? | Nixer | 17 | 918 |
28-01-2024, 16:26 PM Last Post: maksymw |
|
F10 535i MEVD17 working hour reset request | shaggyshadow | 3 | 263 |
31-12-2023, 18:02 PM Last Post: MBENZTECH |
|
ENET Connection Problems | mikkaav | 4 | 483 |
11-12-2023, 20:27 PM Last Post: Node |
|
BMW E87 2004 CAS2 ELV problems | ravager | 2 | 194 |
06-12-2023, 16:23 PM Last Post: ravager |
|
Solved ✔ 2008 BMW 535i power seats issues | koziol | 3 | 389 |
28-08-2023, 23:44 PM Last Post: koziol |
|
Problems in the E-sys 23.04.00 | BMWF750GS | 4 | 696 |
26-08-2023, 01:43 AM Last Post: BMWF750GS |
|
F31 06/17 Front PDC retrofit problems | Freddy1 | 3 | 320 |
19-08-2023, 13:00 PM Last Post: Node |
|
Problems ID4 hdd to sdd | marcospoffo | 3 | 431 |
17-05-2023, 14:58 PM Last Post: juantg93 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content