Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VAG CAN PRO (VCP) with ODIS-S or ODIS-E any version?
24-06-2019, 17:02 PM,
Post: #1
|
|||
|
|||
VAG CAN PRO (VCP) with ODIS-S or ODIS-E any version?
I did a few searches and found no results of anyone asking if a VAG CAN PRO cable (clone or original) could be made to work with any version of ODIS on any version of Windows. I'm willing to do the experimenting but I find it hard to believe that this has not already been tried by someone somewhere. I would think that ODIS would recognize the VCP interface as a SAE J2534 pass-thru device possibly and since we know VCP supports control module programming the VCP interface might be a very reliable, less expensive, and more compatible with Microsoft Windows 10 than a clone VAS 5054A or a clone VAS 6154.
I do not own a VCP yet so if someone has a VCP and is willing to do the testing and experimenting before I go buy one then great. I'm also interested in finding out where you can buy an original VCP as I've had no luck finding anything but clones. |
|||
25-06-2019, 16:11 PM,
Post: #2
|
|||
|
|||
RE: VAG CAN PRO (VCP) with ODIS-S or ODIS-E any version?
Why not using vcp software? This is much more nicer and easier to use
Back to basic....account reset to 2018
Learning by reading, learning by doing, learning by experience |
|||
25-06-2019, 19:39 PM,
Post: #3
|
|||
|
|||
RE: VAG CAN PRO (VCP) with ODIS-S or ODIS-E any version?
(25-06-2019, 16:11 PM)Willinickersen Wrote: Why not using vcp software? This is much more nicer and easier to use I will have to try VCP software as well but what I know is that I like the guided fault finding and guided functions operation of ODIS over the capabilities of anything else I have tried so I would like to see if this is possible still. |
|||
26-06-2019, 05:35 AM,
Post: #4
|
|||
|
|||
RE: VAG CAN PRO (VCP) with ODIS-S or ODIS-E any version?
You probably need a compatible odis driver. Good luck
|
|||
26-06-2019, 09:46 AM,
(This post was last modified: 26-06-2019, 09:50 AM by ATMteam.)
Post: #5
|
|||
|
|||
RE: VAG CAN PRO (VCP) with ODIS-S or ODIS-E any version?
Don't work in my opinion of course... totally different hardware (integrated security card)
Link to the shop |