Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F10 hu_champ prgramming failed with ISTA.
26-06-2019, 12:29 PM,
Post: #1
|
|||
|
|||
F10 hu_champ prgramming failed with ISTA.
Good Day
Any tips how to get the headunit back to life? F10 03/10 built with HU_CHAMP Programmed whole car with ISTA with router and ICOM. Only programming headunit failed. Tried to flash with Esys. Bootloader goes fine, Flashing Swfl gives out this "Service RC_EM_AE returned a negative response with response code conditionsNotCorrect" Error, Ibad goes ok. All flash goes through UDS. I can understand because no ethernet wired to the headunit. Old Metal ZGW. NO CD in the headunit and also in the DVD Changer. And no USB attached. Tried with Enet too also used latest Esys same error when flashing SWFL. Another instance was with another F10 same build also flashed with ISTA at the dealership. Same headunit, also goes in Programming abort. Customer was doing NBT retrofit so he didnt care. I can access the headunit with tool32. Most of the command give out "ECU out of range". Any Ideas? Regards Sebastian |
|||
26-06-2019, 13:44 PM,
Post: #2
|
|||
|
|||
RE: F10 hu_champ prgramming failed with ISTA.
Tried to flash only IBAD it went through ok without any errors.. Don’t know why SWFL fails??
|
|||
29-06-2019, 00:10 AM,
Post: #3
|
|||
|
|||
RE: F10 hu_champ prgramming failed with ISTA.
ISTA will brick all HU_CHAMP units in F series and Mini R56 if flashed to newest software.
Older HW doesnt support newer software... |
|||
Reputation: +1 - sebastianfernandes [+1] | |||
29-06-2019, 04:14 AM,
Post: #4
|
|||
|
|||
RE: F10 hu_champ prgramming failed with ISTA.
So possible to flash with old psdz data with esys?
Oldest i have is ISTA-P V57 |
|||
29-06-2019, 09:50 AM,
Post: #5
|
|||
|
|||
RE: F10 hu_champ prgramming failed with ISTA.
(29-06-2019, 00:10 AM)simaservis1108 Wrote: ISTA will brick all HU_CHAMP units in F series and Mini R56 if flashed to newest software. Where do you have this from? I have flashed many champ. Not one fail. | BimmerFiks AS | Instagram | |
|||
24-07-2019, 15:05 PM,
Post: #6
|
|||
|
|||
RE: F10 hu_champ prgramming failed with ISTA.
(29-06-2019, 09:50 AM)SweetBMW Wrote:(29-06-2019, 00:10 AM)simaservis1108 Wrote: ISTA will brick all HU_CHAMP units in F series and Mini R56 if flashed to newest software. From the experience of 50+ bricked units in official service. CIC-MID 8GB internal memory also from Harman Becker bricks when updated to newest maps. On this forum I recovered 4 CHAMP units from the members that bricked them when updating to the newest SW. |
|||
27-07-2019, 04:22 AM,
Post: #7
|
|||
|
|||
RE: F10 hu_champ prgramming failed with ISTA.
Update
Couldn’t revive the unit. Solved it by replacing with another unit for the customer. Please close the thread.. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content