[Stitch]

hi!
got the activation by clusters in the k-suite 2.47 thread and got it installed. when connected to the chinese k-tag master 7.020 clone and starts the program it searches for updates, there pops up a screen that saids: 
"connection to the internet not detected"
i close the popup and the program starts. all i can access is: "info" "options" and "help", all other like "protocol" the boat, cars, bikes etc is grey and cant be clicked & the "extras" isnt even there.
at first i tried with normal login and no internet, then with internet, then logged in as administrator and no internet, then with internet and its still the same. i installed the old k-suite 2.23sw just to try and it works fine as it should.

any good ideas of whats wrong and what i can try to get it to work?

i have windows 8 on my laptop.

[bmwadriatic]

Ksuite 2.47 is only for Chinese Kess 5.017. For Chinese KTAG 7.020 is the latest working Ksuite 2.25.

[Stitch]

ok thanx!
got the chinese kess 5.017 also.
i´m kinda new to this so if you could clearify some things i would be grateful!
i have used the kess through obd on bmw e61 to read & write and it worked fine, on bmw e87 and e91 it didnt work with kess through obd so i went with the k-tag & positioningframe with probes and adapters and it worked fine.
Now i would like to do bmw F-series cars which i find on the k-suite 2.47, how do i approach it if the 2.47 is only for kess? the kess is only for obd tuning right? and the k-tag when u need to go directly in the ecu? the f-series are only possible to do directly to the ecu right?

[Enabled]

You have to run K-Suite 2.23 when using KTAG and K-Suite 2.47 when using Kess.

That's it.

[Willinickersen]

Or better, using Ksuite 2.25 for Ktag

[Enabled]

Is there an actual benefit to 2.25 for ktag 7.020? I don't see any new protocols.

[Willinickersen]

The Ksuite 2.25 works perfectly with KTAG 7.020, is you don't see anything new, you need a better copy

[Stitch]

ok thanks!
in the 2.47 under the options button and supported vehicles, if i check the kess menu it only shows E-series cars while under the k-tag menu it also shows F-series cars.
got any ideas what i need to do F-series cars? are they availiable in the 2.25 through k-tag?

[Willinickersen]

I think you don't have the right good version including the newest dll and help files

[Stitch]

sorry i don´t understand?
with my k-tag 7.020, if i get k-suite v2.25 instead of the v2.23 should i then be able to do f-series cars? or do i need a different k-tag or what?