Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

2014 BMW F10 ROUGH IDEAL START UP HELP
28-06-2019, 19:54 PM, (This post was last modified: 28-06-2019, 23:04 PM by iky786.)
Post: #1
XZBMW  2014 BMW F10 ROUGH IDEAL START UP HELP
hi  guys working on the above vehicle , fault code injector correction factors cylinder 2 out off tolerance on start up only when cold   

injector has been changed & codded , new glow plugs & module installed 

inlet manifold cleaned , new EGR valve fitted as well 

if i disconnect MAF  sensor engine runs fine - swapped it for  another MAF  still the same issue 

only runs rough for a few minutes . any help to fixing this issue would be great thanks

Vin D863777


Attached Files Thumbnail(s)
   
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Bmw F15, 2014 acsm changed redog4dy 2 97 17-04-2024, 11:15 AM
Last Post: Spirit5676
XSMini Retrofitted EntryNav sometimes doesn't start correctly user0086 4 246 04-04-2024, 08:44 AM
Last Post: Stratofortress
XZBMW [HELP] Reset Hour EDC17 c50 (BMW F26 B47 2014) ruben_17non 12 883 05-03-2024, 14:34 PM
Last Post: mertdavid
  2014 BMW 535dX adblue reset koziol 1 157 22-02-2024, 05:33 AM
Last Post: Stratofortress
  E91 2011 need Start/Stop OFF + NCS Dummy error roanoke 3 176 20-02-2024, 08:53 AM
Last Post: test01
XZBMW Deactivate Startup assistant / Hill start assistant? F11 Blondy 0 117 16-02-2024, 08:58 AM
Last Post: Blondy
  G02 dkombi2 problem boot start cupra80 2 254 22-01-2024, 07:00 AM
Last Post: cupra80
  Bmw 328i f30 1B2002 Ews protection against tampering: no start value programmed Bavrian 2 248 10-01-2024, 10:30 AM
Last Post: Bavrian
XZBMW Solved ✔ E92 M57N2 dsc,abs,gearbox, not start, problem ArcziArcz 6 397 09-12-2023, 07:14 AM
Last Post: ArcziArcz
XZBMW CAS2 + MSV70 will not start after battery disconnect / lost DME<->CAS sync bmw335coding 1 234 11-11-2023, 12:19 PM
Last Post: johann74270

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content