[josef1708]

Ich Hey guys

I tried this:
https://cartechnology.co.uk/showthread.php?tid=52833
Chksm Not ok.
Chksm was corrected by flasher .
Correct cksm made with ols in attachment


Dtc get off and car doesnt Start .
So can anyone remove readness of Instrument Cluster and can bus completly?

Wont Start

[josef1708]

DMissing Instrument Cluster on Other me 7.5 tut:


@@@@@@@@@@
DTC disables
Missing Message from Instrument Cluster
If you see "18058 - Powertrain Data Bus: Missing Message from Instrument Cluster", and adjusting cluster adaptation channel 60 doesn't fix it:
CW_CAN_R (0x12C7A and 0x12C7C) - CAN receive enable
For the M-box:

12C7A (applicable for softcoding 06611) 32--->0
12C7C (applicable for softcoding 06711) 36--->4 (Don't just 0 this or you remove ABS/ESP module reception from the ecu)
For the L-box you can't 0 these or you'll kill CAN reception/timeout monitoring for the TCU as well. Instead:
12C7A (applicable for softcoding 06651) 35--->3
12C7C (applicable for softcoding 06751) 37--->7
This will ensure CAN monitoring is still active for the TCU and ABS, but kill P1650 when running M or L-box software in the earlier Bosch equipped cars[56]
You should only need this for older clusters that can't be fixed by recoding them (i.e. they do not have CAN, only k-line).
@@@@@@@@@@

Attached image shows my cw_can_r But dont know which data i have to insert?


Current Data pictures

[josef1708]

removed CW_CAN_R Receipt completly. But immo off didnt work. Any one idea how to immo off with works without instrument cluster?