[OliveGarden]

Hello to EveryOne,

could someone help me with a modified .mpc and / or .epr immo off file(s) with "no dash liights" for a VW Crafter with EDC17C54 ECU?
I have tried everything but the 2 dash lights still lights up / blinking. Someone writes to uses only the .epr file and / or the .mpc file.
I have corrected the checksum via KTAG and also WinOLS but no luck.

Maybe I made a fault somewhere or EDC17 IMMO OFF isn't the right software for it.
It would be great if someone here has a solution for it.
Thanks a lot.




Best Regards,

[raffy haddad]

Hello to EveryOne,

could someone help me with a modified .mpc and / or .epr immo off file(s) with "no dash liights" for a VW Crafter with EDC17C54 ECU?
I have tried everything but the 2 dash lights still lights up / blinking. Someone writes to uses only the .epr file and / or the .mpc file.
I have corrected the checksum via KTAG and also WinOLS but no luck.

Maybe I made a fault somewhere or EDC17 IMMO OFF isn't the right software for it.
It would be great if someone here has a solution for it.
Thanks a lot.




Best Regards,

hello here test if you like it should work assuming that the data posted are orig not manipulated
report back
regards

[OliveGarden]

Hello Raffy,

thanks a lot for your work and your files. The 2 dash lights still blinking (key light and glow plug light) but the car starts. I had posted the original files to check where maybe I have made a mistake.

The problem with the car is that after driving and the engine is hot, the car doesn't start again. I have to wait for maybe a half an hour to restart it.

Can I check the working files / reflashed ECU without transponder to unlock the ignition lock and start the car or it is only working with the original transponder?
Thanks a lot.




Best Regards,

[atomantmk]

I think that your ECU is on the way to God, always when is hot engine don't start and that means that you need other ECU.

[OliveGarden]

Okay, an internal defect, nothing to do with Immo Sytem? But what is with the blinking dash lights?
Can IMMOOFF17 deactivate these lights by using it for ImmoOff or it is only workable with other ECU's?

[ROD-BENDERS]

Okay, an internal defect, nothing to do with Immo Sytem? But what is with the blinking dash lights?
Can IMMOOFF17 deactivate these lights by using it for ImmoOff or it is only workable with other ECU's?

No it can not friend, syncro new key and lights should go away