[Mshumacher]

Hi i have a friend with a 2019 BMW F850GS, its still under warranty so not doing anything still, but for when the dealer warranty expires, hes already asking me for a remap.

So I was wondering if theres a non expensive tool, to flash remaps on bench for this bike ?
- I dont think there is one ??

Also what would be a suitable tool, to reset service oil changes, dtcs etc, apart from bmw icom ?

Thanks.

[ROD-BENDERS]

Hi i have a friend with a 2019 BMW F850GS, its still under warranty so not doing anything still, but for when the dealer warranty expires, hes already asking me for a remap.

So I was wondering if theres a non expensive tool, to flash remaps on bench for this bike ?
- I dont think there is one ??

Also what would be a suitable tool, to reset service oil changes, dtcs etc, apart from bmw icom ?

Thanks.

I bought a Duonix Bike Scan Pro Motorad to look after my bmw R1200GS, the tool is relatively cheap at under 300 euro and it does most things like resets dtc fault codes etc, the only gripe I have about it is, although it is set to english language, the fault codes read out in german which for me is a pain. Aside from that it is a good scanner

[Nerox]

I would advise you a good ICOM A2 Clone ... Then you'll be able to to anything as a dealer

Overall budget : 250 euros

[gergus]

I would advise you a good ICOM A2 Clone ... Then you'll be able to to anything as a dealer

Overall budget : 250 euros

Thanks for answering, I join the question, what would be a good one?

[Nerox]

I would advise you a good ICOM A2 Clone ... Then you'll be able to to anything as a dealer

Overall budget : 250 euros

Thanks for answering, I join the question, what would be a good one?

Sorry for the delay !  I got mine off ali.. But if you want to go "buletproof" , i think a real one is 350 euros from bmw. But for my use, this clone is perfect. 

Sadly the seller i used isn't proposing a clone anymore..
part number 81312360883 for ref
You also need ICOM D cable (check on ali, 10 bucks)