[Adel75]

Hi Everyone ,

I have a BMW X1 E84 , 2010  , tried to make for it a new key and after reading its CAS , the car died and wont start not even ignition 

pls can someone help by repairing these dump files 

ur help will be very appreciated 

with kind regards 

Adel

[laso]

Hi
what tool did you try to read it?

[Adel75]

Hi
what tool did you try to read it?

Hi 

VVDI prog

regards 

Adel

[laso]

Try repair with CAS3+ editor
Search on web.
At this moment i write on my phone.
You only read CAS eeprom?
Check soldering.
Vvdi prog it's good tool

---

unless you can also do this:
Buy used CAS 3 non crypted.
Read ISN from ECU DME or DDE.
Change ISN in CAS and VIN and mileage
Copy the FA from FRM to CAS.
To make a new key

[pioan]

post picture with cas sticker. Your flash is bad!

[Adel75]

post picture with cas sticker. Your flash is bad!

Thank u for ur reply and help 

here it is the sticker 

and ISN from Key 

car was all key lost this why try to make key from CAS

---

post picture with cas sticker. Your flash is bad!

Thank u for ur reply and help 

here it is the sticker 

and ISN from Key 

car was all key lost this why try to make key from CAS

[krug]

post picture with cas sticker. Your flash is bad!

Thank u for ur reply and help 

here it is the sticker 

and ISN from Key 

car was all key lost this why try to make key from CAS

---

post picture with cas sticker. Your flash is bad!

Thank u for ur reply and help 

here it is the sticker 

and ISN from Key 

car was all key lost this why try to make key from CAS

U using  Explorer so  just  load  eeprom to  calc  and  see  at  what  state your eeprom.

[pepi]

Your flash is 100% OK .check eprom.

[danyparis]

Eeprom 100% ok
Damaged Flash

[zigalloo]

BMW X1 E84 , 2010 CAS3+ PLEASE GUYS I NEED THE FLASH AND EEPROM DUMP FOR THE BMW X1 E84 CAS3+