[jonazizbey]

Hi 
Guys  and Collegues 
Please help me also 
I have managed to recover my Xprog ( which was 5.84 version and not properly working before). 
I reflashed into Luise Ander version, Now its 5.5.1 
I have attached photos, After All procedures I managed to read and verify eeprom ST 95080, 2-3 times only, after I exit software and enter again to make sure working correctly. it stops reading 

But it still checks Authorization,  checking Device ID, communication Between PC and Xprog all ok, even I checked voltage while trying to read eeprom, its giving 5 volts into eeprom pins, But coming out a fault saying Device is silent  Initialising device  --- green LED on and after 3-4 secunds Red LEd coming on and  Device is silent 

what could be ? My laptop windows 7 -  64 bit



I tried same procedure with home PC windows 7 32 bit (This totally disconnected from Internet), choose ST 95080 eeprom
when i press to read button ST 95080 eeprom --- it has read , but not verify and start giving same error, device is silent 
after that it stoped reading again, 

I read same chip ST 95080 eeprom with UPA chines clone, it has read 10 times and verify as well without any problem.