[ns79]

Hi,


I replaced BSI and ECU with the donated car. The BSI now has a mileage of 99304 km and a dashboard of 203126 km. Does this have to be matched? And do I have to do Virgin eeprom BSI? At ECU i made immo off.


Thank you

[poita]

there is your file reset

dont forget thanks and rep


thanks

[ns79]

Hi,


thanks a lot for help I did write your BSI eeprom but still i have the same problems.

ECU and BSI are from donors car...keys are not from donors car.

Engine works and everything is fine. Only this BSI error and when I do the configuration in BSI after a while and removing the positive voltage, the settings return as they were on the donor's car i think (airbag problems, fog lamps, rear reverse light, etc ...)

For ECU I did Immo off. Now I have a F4BA error in BSI ... and Antitheft on the display,too.

Maybe the problem now is the difference in the VIN number between BSI and Dashboard? Also when i configure new chassis number with Diagbox after removing the positive voltage BSI restore the old chassis number?

Or maybe Steering Column Lock now is problem?

I need this VIN number in ECU,BSI,Dashboard: VF34E9HXC9S188933

Please help and tell me where to go? I'm stuck for days with this already

Regards

Neven from Croatia