Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
TV on cic e92 bench setup
12-07-2019, 13:05 PM,
Post: #1
|
|||
|
|||
TV on cic e92 bench setup
Hi all,
I have a problem thats driving me mad.... I have a full bench setup. CAS, jbbr, key, elv, kombi, cic, controler and screen. it all works perfectly, i can code and program etc, FSTools work, inpa, ista (d and p). inpa, edabas. you name it it all works. nav updates etc I've now added TV, combox and diversity antennas etc... again all working However. I can not get a tv picture in screen, all i get is I have coded TVIM for the cic and i can confirm that it is enabled. but still i get the block screen. I assume that the bench "thinks" its handbrake is not on. Does anyone have any advice as to get this working?? |
|||
12-07-2019, 13:51 PM,
Post: #2
|
|||
|
|||
RE: TV on cic e92 bench setup
Try to code CIC with video in motion.
|
|||
12-07-2019, 13:56 PM,
Post: #3
|
|||
|
|||
RE: TV on cic e92 bench setup
Thanks for the email mate...
I've done that, several times, that does not work. |
|||
12-07-2019, 14:45 PM,
(This post was last modified: 12-07-2019, 14:47 PM by dumitru.o.)
Post: #4
|
|||
|
|||
RE: TV on cic e92 bench setup
if you believe this to be the issue:
I assume that the bench "thinks" its handbrake is not on. then there is a line in coding to disable it.....but i don t think this is the issue. Maybe you should try on the bench to use a canbridge instead of CAS.....saves you of lot of headaches my assumption is that the wheelspeed value is missing from the CAS (which it s normal) or it s invalid check this out: |
|||
12-07-2019, 15:09 PM,
Post: #5
|
|||
|
|||
RE: TV on cic e92 bench setup
Hi Dumitru,
Many thanks mate, i have coded the handbrake out as well same thing, you could be right and it is a speed sensor thing. Ive just done a search on the canbridge and cant find any info.?? Love your bench setup BTW |
|||
16-07-2019, 04:47 AM,
Post: #6
|
|||
|
|||
RE: TV on cic e92 bench setup
hi
that is not my bench setup but i have a similar one. here is the canbridge i have: https://carsystems.com.ua/diagnostic-mod...-bridge-en |
|||
16-07-2019, 07:03 AM,
Post: #7
|
|||
|
|||
RE: TV on cic e92 bench setup
Perfect thanks.
There is no prices on there, what did you pay for yours? |
|||
16-07-2019, 07:34 AM,
(This post was last modified: 16-07-2019, 07:37 AM by dumitru.o.)
Post: #8
|
|||
|
|||
RE: TV on cic e92 bench setup
|
|||
16-07-2019, 18:00 PM,
Post: #9
|
|||
|
|||
RE: TV on cic e92 bench setup
guys, can you give me please pinout for tvmodule? and maybe coding options?
thanks |
|||
17-07-2019, 07:16 AM,
Post: #10
|
|||
|
|||
RE: TV on cic e92 bench setup
for the old style tv module
1 = gnd 11 = +12v tv - 4 = Vid + = 18 - cic tv - 12 = Shield = 28 - cic tv - 13 = Vid - = 27 - cic |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Tool for bench read 8hp | Garryq | 9 | 1,551 |
26-03-2024, 09:32 AM Last Post: skywoker |
|
F80 Cluster - setup | iskullbox | 2 | 263 |
25-03-2024, 14:38 PM Last Post: Unspec |
|
Bosch MEVD172H bench backup | mrproper | 1 | 247 |
23-03-2024, 18:43 PM Last Post: Ratnik1990 |
|
ESys Launcher PRO Setup 2.8.1 | fengyonghua21 | 400 | 47,039 |
28-02-2024, 09:39 AM Last Post: Pommie |
|
ENAV2 bench activation | Airbus | 10 | 792 |
25-02-2024, 08:17 AM Last Post: jb2005 |
|
ISTA...setup | macchief | 17 | 1,166 |
17-02-2024, 20:33 PM Last Post: macchief |
|
Motronic 3.3.1 bench | jaramillo | 3 | 172 |
13-02-2024, 05:12 AM Last Post: 2013m5 |
|
Dde Coding/flash with esys in bench? | ruben_17non | 0 | 183 |
08-02-2024, 21:28 PM Last Post: ruben_17non |
|
Entrynav2 - Trying to Trigger Component Protection on Bench | 2002JCW | 5 | 463 |
30-01-2024, 16:44 PM Last Post: DEJMIEN |
|
NBT display on bench without unit | djordan | 4 | 319 |
15-01-2024, 08:08 AM Last Post: Powerlab |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content