Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. AutoHex II

  2. FemtoEVO



BMW E84 Problem After Coding
12-07-2019, 21:15 PM,
Post: #1
XZBMW  BMW E84 Problem After Coding
After coding of folding mirrors with NCS light module was dead, I have repaired and everything was back except driver windows, closing and opening from button works but not with fob key when you press long on the key.

Triple turn signal was gone too but I think that I must to look in CIC menu for this option.

I have change master language on CIC to be English UK and language 1 English US, language 2 German and language 3 Spanish but after coding it was just like VO coding.

Do I must to play with VO and change to English?

Here are TRC files from CAS and NFRM, if someone has time to look and tell what is wrong with driver windows?


Attached Files Thumbnail(s)
       
Downloads.zip
File Type: .zip
Downloaded: 5 times
Size: 8.23 KB

Quote this message in a reply
12-07-2019, 22:29 PM,
Post: #2
RE: BMW E84 Problem After Coding
That's a horrible situation to be in.

I think the turn signal is linked to the idrive where you have to go and activate it again. Unfortunately I don't have the answers to the other questions but I'm sure someone will along to help.

Just curious, did you have the car running when coding or was it just the ignition on?
Quote this message in a reply
13-07-2019, 06:12 AM, (This post was last modified: 13-07-2019, 06:14 AM by atomantmk.)
Post: #3
RE: BMW E84 Problem After Coding
No, I use always CTEK MXS25 when do coding or programming, it's always 13.5 volts.
Quote this message in a reply
13-07-2019, 13:27 PM,
Post: #4
RE: BMW E84 Problem After Coding
(13-07-2019, 06:12 AM)atomantmk Wrote:  No, I use always CTEK MXS25 when do coding or programming, it's always 13.5 volts.

You said you repaired the NFRM module so I take it you didn't replace it? Have you tried to VO code the NFRM module to factory settings and then adding the folding mirror again?
Quote this message in a reply
13-07-2019, 15:29 PM,
Post: #5
RE: BMW E84 Problem After Coding
Yes, NFRM is VO coded, triple turn signal activate from iDrive and problem with driver window was solved with ISTA initialising power windows, CIC coded with only one language and now is everything okay.
Mirror folding stays for future time.
All problems are now gone!
Quote this message in a reply
[+] 1 user says Thank You to atomantmk for this post


Possibly Related Threads...
Thread Author Replies Views Last Post
  i3 SAS retrofit problem Oreon 2 109 1 hour ago
Last Post: Oreon
  Bench Coding - Need help on required components TokenMaster 19 817 4 hours ago
Last Post: BugFix
XZBMW Bmw e60 Seat Occupancy coding with NCSexpert florinu 8 208 Yesterday, 18:14 PM
Last Post: bmwcoder75
XZBMW ZF 8HP45Z SAT problem Alexandru.k_24 12 206 Yesterday, 10:12 AM
Last Post: Alexandru.k_24
XZBMW G12/G30 - Disabling Horn on Lock on new Firmware [Coding SOLVED] Almaretto 20 5,772 17-07-2019, 19:50 PM
Last Post: MicRofT
XZBMW Coding BMW motorcycle K1600gt pdc 51 7,824 17-07-2019, 11:56 AM
Last Post: warhol99
XZBMW F15 Tow Hitch Retrofit Coding atomantmk 7 369 16-07-2019, 18:11 PM
Last Post: atomantmk
  2016 BMW F80 M3 GTS Coding m3nt4l 1 173 15-07-2019, 21:03 PM
Last Post: kubixix
  ISTA 4.18.14 license problem Fatalix 19 1,103 14-07-2019, 20:59 PM
Last Post: uragan1987
  E60 problem with ignition laso 2 182 14-07-2019, 15:34 PM
Last Post: laso

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content