Possibly Related Threads…

***atomantmk*** · 12-07-2019, 21:15 PM,

After coding of folding mirrors with NCS light module was dead, I have repaired and everything was back except driver windows, closing and opening from button works but not with fob key when you press long on the key.

Triple turn signal was gone too but I think that I must to look in CIC menu for this option.

I have change master language on CIC to be English UK and language 1 English US, language 2 German and language 3 Spanish but after coding it was just like VO coding.

Do I must to play with VO and change to English?

Here are TRC files from CAS and NFRM, if someone has time to look and tell what is wrong with driver windows?

***Lemta*** · 12-07-2019, 22:29 PM,

That's a horrible situation to be in.

I think the turn signal is linked to the idrive where you have to go and activate it again. Unfortunately I don't have the answers to the other questions but I'm sure someone will along to help.

Just curious, did you have the car running when coding or was it just the ignition on?

***atomantmk*** · (This post was last modified: 13-07-2019, 06:14 AM by atomantmk.)

No, I use always CTEK MXS25 when do coding or programming, it's always 13.5 volts.

***Lemta*** · 13-07-2019, 13:27 PM,

(13-07-2019, 06:12 AM)atomantmk Wrote: No, I use always CTEK MXS25 when do coding or programming, it's always 13.5 volts.

You said you repaired the NFRM module so I take it you didn't replace it? Have you tried to VO code the NFRM module to factory settings and then adding the folding mirror again?

***atomantmk*** · 13-07-2019, 15:29 PM,

Yes, NFRM is VO coded, triple turn signal activate from iDrive and problem with driver window was solved with ISTA initialising power windows, CIC coded with only one language and now is everything okay.
Mirror folding stays for future time.
All problems are now gone!

***warhol2010*** · 24-07-2019, 06:11 AM,

FRM is dead
Fix the FRM

(12-07-2019, 21:15 PM)atomantmk Wrote: After coding of folding mirrors with NCS light module was dead, I have repaired and everything was back except driver windows, closing and opening from button works but not with fob key when you press long on the key.

Triple turn signal was gone too but I think that I must to look in CIC menu for this option.

I have change master language on CIC to be English UK and language 1 English US, language 2 German and language 3 Spanish but after coding it was just like VO coding.

Do I must to play with VO and change to English?

Here are TRC files from CAS and NFRM, if someone has time to look and tell what is wrong with driver windows?

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	NBT Evo CAFD missing after coding error	Mugga	13	577	Yesterday, 22:47 PM Last Post: Mugga
	Coding a F80 M3 race car	PeterY	9	386	Yesterday, 13:52 PM Last Post: PeterY
	6wb cluster swap and coding	xMoses	4	211	22-04-2024, 19:07 PM Last Post: NikolaIMRS
	M performance brake DSC2 SBRE coding	Ckh091020	3	215	22-04-2024, 12:58 PM Last Post: Ckh091020
	pulling both paddles put transmission into neutral coding	tintoverano	1	114	22-04-2024, 12:42 PM Last Post: raresh.tazz
	NBT EVO Connected Drive problem after update I-Level	SkeYT	47	4,704	22-04-2024, 11:44 AM Last Post: kwat
	F20 LCI2 black panel cluster coding	sqorpius	9	2,009	21-04-2024, 12:38 PM Last Post: Adekborys69
	G01 2019 X3 - ATM Replacement/Coding Help Needed	jchisholm17	10	437	18-04-2024, 21:44 PM Last Post: jchisholm17
	TMS FRM3 F10 Coding issue	mj_mj_mj	17	1,927	16-04-2024, 09:30 AM Last Post: user_530d
	Bmw G31 retrofit Mgu id7 atm problem	intranet	19	2,317	15-04-2024, 09:21 AM Last Post: evaldazj

Contact Us