Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. AutoHex II

  2. CarLabImmo

  3. TMPro 2



Peugeot 206 Immo for Sagem S2000-2A
14-07-2019, 10:15 AM,
Post: #1
Peugeot 206 Immo for Sagem S2000-2A
Hi everyone.

Looking for a Known working Immo for this ECU unit ,Ive tried some listed for the S2000 but can't find any that
work or any listed for this 2A version.
Are they model specific  -2A different to -23 etc ?.
The BIN file attached is from the spare ECU not the Original.

The units i have are identical except for the Bold number at the bottom of the sticker.
The photo is of the original unit in the car. 
The spare i need to program has the number  3304 917135

Peugeot 206 1.4 Petrol  2002 

Thanks


Attached Files Thumbnail(s)
   
SH ECU Pug 206.rar
File Type: .rar
Downloaded: 3 times
Size: 480 bytes

Quote this message in a reply
14-07-2019, 10:52 AM,
Post: #2
RE: Peugeot 206 Immo for Sagem S2000-2A
(14-07-2019, 10:15 AM)loadedtoad Wrote:  Hi everyone.

Looking for a Known working Immo for this ECU unit ,Ive tried some listed for the S2000 but can't find any that
work or any listed for this 2A version.
Are they model specific  -2A different to -23 etc ?.
The BIN file attached is from the spare ECU not the Original.

The units i have are identical except for the Bold number at the bottom of the sticker.
The photo is of the original unit in the car. 
The spare i need to program has the number  3304 917135

Peugeot 206 1.4 Petrol  2002 

Thanks

try immo code: 53DY
Quote this message in a reply
14-07-2019, 11:22 AM,
Post: #3
RE: Peugeot 206 Immo for Sagem S2000-2A
(14-07-2019, 10:52 AM)motor man Wrote:  
(14-07-2019, 10:15 AM)loadedtoad Wrote:  Hi everyone.

Looking for a Known working Immo for this ECU unit ,Ive tried some listed for the S2000 but can't find any that
work or any listed for this 2A version.
Are they model specific  -2A different to -23 etc ?.
The BIN file attached is from the spare ECU not the Original.

The units i have are identical except for the Bold number at the bottom of the sticker.
The photo is of the original unit in the car. 
The spare i need to program has the number  3304 917135

Peugeot 206 1.4 Petrol  2002 

Thanks

try immo code: 53DY

Hi thanks for reply but i think i may have phrased the question wrong or not understood the answer.

The reply i'm assuming is the PIN code for that ECU 
 
I need the Bin file with immobiliser removed to load into the second hand ECU so i can use it with the existing BSI and Key. 

Not a car Forum i know but a bit of background may help The 206 has 2 fans as it has Air Con but the 2nd fan doesn't work and causes the first fan to only come at dangerous temp with warning.
All test's have been made and conclusuion is the ECU is not operating the second relay. Control tests with planet Peugeot will not enable output of second fan to sink current.First fan works fine when tested with PP.
The idea was use a spare ECU to eliminate or prove the fault.Hence needing the immobiliser removed.
All configurations are correct for vehicle Air con enabled dual fan etc.
Luckily have all the programing gear from years in Industrial control systems.
But first go at Vehicle ECUs   

Thanks
Quote this message in a reply
14-07-2019, 11:51 AM, (This post was last modified: 14-07-2019, 11:51 AM by dabaca.)
Post: #4
RE: Peugeot 206 Immo for Sagem S2000-2A
(14-07-2019, 11:22 AM)loadedtoad Wrote:  
(14-07-2019, 10:52 AM)motor man Wrote:  
(14-07-2019, 10:15 AM)loadedtoad Wrote:  Hi everyone.

Looking for a Known working Immo for this ECU unit ,Ive tried some listed for the S2000 but can't find any that
work or any listed for this 2A version.
Are they model specific  -2A different to -23 etc ?.
The BIN file attached is from the spare ECU not the Original.

The units i have are identical except for the Bold number at the bottom of the sticker.
The photo is of the original unit in the car. 
The spare i need to program has the number  3304 917135

Peugeot 206 1.4 Petrol  2002 

Thanks

try immo code: 53DY

Hi thanks for reply but i think i may have phrased the question wrong or not understood the answer.

The reply i'm assuming is the PIN code for that ECU 
 
I need the Bin file with immobiliser removed to load into the second hand ECU so i can use it with the existing BSI and Key. 

Not a car Forum i know but a bit of background may help The 206 has 2 fans as it has Air Con but the 2nd fan doesn't work and causes the first fan to only come at dangerous temp with warning.
All test's have been made and conclusuion is the ECU is not operating the second relay. Control tests with planet Peugeot will not enable output of second fan to sink current.First fan works fine when tested with PP.
The idea was use a spare ECU to eliminate or prove the fault.Hence needing the immobiliser removed.
All configurations are correct for vehicle Air con enabled dual fan etc.
Luckily have all the programing gear from years in Industrial control systems.
But first go at Vehicle ECUs   

Thanks
cut pin f3 f4  middle connector.


Attached Files
SH ECU Pug 206 off.rar
File Type: .rar
Downloaded: 0 times
Size: 414 bytes

Reputation: +1 - raffy haddad [+1]
Quote this message in a reply
[+] 1 user says Thank You to dabaca for this post
14-07-2019, 12:01 PM,
Post: #5
RE: Peugeot 206 Immo for Sagem S2000-2A
(14-07-2019, 11:51 AM)dabaca Wrote:  
(14-07-2019, 11:22 AM)loadedtoad Wrote:  
(14-07-2019, 10:52 AM)motor man Wrote:  
(14-07-2019, 10:15 AM)loadedtoad Wrote:  Hi everyone.

Looking for a Known working Immo for this ECU unit ,Ive tried some listed for the S2000 but can't find any that
work or any listed for this 2A version.
Are they model specific  -2A different to -23 etc ?.
The BIN file attached is from the spare ECU not the Original.

The units i have are identical except for the Bold number at the bottom of the sticker.
The photo is of the original unit in the car. 
The spare i need to program has the number  3304 917135

Peugeot 206 1.4 Petrol  2002 

Thanks

try immo code: 53DY

Hi thanks for reply but i think i may have phrased the question wrong or not understood the answer.

The reply i'm assuming is the PIN code for that ECU 
 
I need the Bin file with immobiliser removed to load into the second hand ECU so i can use it with the existing BSI and Key. 

Not a car Forum i know but a bit of background may help The 206 has 2 fans as it has Air Con but the 2nd fan doesn't work and causes the first fan to only come at dangerous temp with warning.
All test's have been made and conclusuion is the ECU is not operating the second relay. Control tests with planet Peugeot will not enable output of second fan to sink current.First fan works fine when tested with PP.
The idea was use a spare ECU to eliminate or prove the fault.Hence needing the immobiliser removed.
All configurations are correct for vehicle Air con enabled dual fan etc.
Luckily have all the programing gear from years in Industrial control systems.
But first go at Vehicle ECUs   

Thanks
cut pin f3 f4  middle connector.

Pins F3 and F4 have already been cut but still no good .
Quote this message in a reply
14-07-2019, 16:51 PM,
Post: #6
RE: Peugeot 206 Immo for Sagem S2000-2A
Two memory portions in this ECU and to most ECU's, flash and eeprom. We could say the flash portion is model or vehicle configuration specific, in this case I think "2A" is manual gearbox, surely "2B" is AL4 automatic. Vehicle configuration availability, ex. types of cooling fan, also written in flash.

But all setting parameters are controlled by eeprom. After the option has been selected the data is save here. In your case, the immo off eeprom might be made with some other setting than yours. Try to re-configure by diag tool and see, this has no effect to immo off function.
Reputation: +1 - raffy haddad [+1]
Quote this message in a reply
[+] 1 user says Thank You to zmann for this post


Possibly Related Threads...
Thread Author Replies Views Last Post
  Need flash bsi peugeot 5008 bsi jc mohamedrhim 2 101 10 hours ago
Last Post: mohamedrhim
  Renault clio 1.2 Magneti Marinelli IAW 5NR2 C2 immo off problem ahmetgg 35 16,398 Yesterday, 16:22 PM
Last Post: spiki_x
ZVW Immo Off for ME17.5.6 abbas acer 3 93 Yesterday, 15:13 PM
Last Post: raffy haddad
ZTAudi Need Immo Off Audi A4 M3.2 8D0907557 - 0261203550/551 balzai 5 80 Yesterday, 15:10 PM
Last Post: raffy haddad
ZTAudi Audi a2 AUA immo off Dkgti 0 44 Yesterday, 15:07 PM
Last Post: Dkgti
UNissan Nissan Pickup Immo off 23710 VK560 ecuboost 0 47 Yesterday, 13:07 PM
Last Post: ecuboost
  Ecu Iaw59f m7 hw304 need immo off fluorescent 2 201 17-07-2019, 23:16 PM
Last Post: victorysatgr
ORenult Renault clio 1.9 TDI immo off Wogabun 3 150 17-07-2019, 21:22 PM
Last Post: Hansi72
  Dacia Logan 1.4 8v Immo off ubistvo 4 114 17-07-2019, 16:20 PM
Last Post: ubistvo
WHyundai immo off zexel 39100-42610 hyunday H1 2.5td juanmatron1 2 169 17-07-2019, 12:08 PM
Last Post: juanmatron1

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content