Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Error on VDO odometer golf 6 NEC 24C64.
18-07-2019, 14:04 PM,
Post: #1
|
|||
|
|||
Error on VDO odometer golf 6 NEC 24C64.
Hi guys,
Desoldered 24c64 eeprom from instrument cluster, read it with miniPro programmer. Read it ok. The reason was to add a key because all keys were lost. Now, when we connect the cluster to power, it shows "Err" instead of kilometers. Attached dump. Can anyone tell me what to do change in the dump to get it working again? The car is not here, I only have instrument cluster. Eeprom dump here is original. Desoldered, read it and put back. Then error occured and I did the same: desolder, read, write original file back on eeprom (just in case), put it back, still error. Is it possible someone before me tried odometer adjustment and failed? Or how can I see / erase dtc's in this original dump file? |