Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW Tools?
19-07-2019, 09:14 AM,
(This post was last modified: 19-07-2019, 09:32 AM by blax123.)
Post: #1
|
|||
|
|||
BMW Tools?
Hi Guys
Which Tool (all-rounder) or Tools you can recommend for BMW Work Doing some E/F Series Keys E/F Series Instrument Cluster Mileage/VIN Reset F Series 8HP EGS ISN Reset I saw that Yanhua is saying their tool can do all of this work but read a lot of negative comments here on Cartech about Yanhua. What Tool(s) are recommendable? |
|||
19-07-2019, 16:00 PM,
(This post was last modified: 19-07-2019, 16:02 PM by Matthew53.)
Post: #2
|
|||
|
|||
RE: BMW Tools?
CGDI is a competition device. Actually, yanhua is pretty similiar to CGDI, but there are some exceptions.
CGDI doing programming and coding of E and F series, and you need only FEM adapter to read eeprom directly on PCB, without soldering. In Yanhua you need to buy different adapters, however you can buy FULL kit with all the adapters. With these adapters you have an advantage, that you can read eeproms. In CGDI, if you can't do a remote directly in OBD, then you need to read eeprom by programmer (e.g VVDI prog) and then write it back after transponder programming. You can reset mileage in CAS with CGDI and you can reset mileage in odometer and CAS with Yanhua. CGDI will handle EGS ISN reset, but I didn't found such information on Yanhua site, so I assume it doesn't support that function. Only BMW services:
Remote coding/programming - E, F, G serie HDD change, Carplay, Screen mirroring activation FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS Remote reset 8HP ISN F serie ELV disable for CAS3, 3+ |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content