[mgs41987]

Hi looking for a recommended person for file tuning service on my pd150, i ideally want someone who knows what they are doing with vag 

i used to use someone for my files before hand but they vanish off the face of the earth, basically want as much power as i can get without blowing it up instead of generic map to cover asses. and also do i need to upgrade map sensor to a 4 bar, looking to change turbo in the near future as well

[walshy155]

It's a VAG diesel, not hard to tune to be honest. You won't blow it up, diesels are not prone to serious damage like petrol are due to wrong AFRs. You are limited by max turbo boost can't remember off the top of my head but they are Gt1749 units good for around 200 hp. You will need to upgrade map sebsor if you are looking to get a bigger turbo and also injectors, clutch, intercooler etc have a look at some gt 2260 or 2257 or GTB even better. This has been done many many times

Also you won't see much difference in a generic map and custom for stage 1, but if you start modifying the engine then any map will have to be custom

[mgs41987]

It's a VAG diesel, not hard to tune to be honest. You won't blow it up, diesels are not prone to serious damage like petrol are due to wrong AFRs. You are limited by max turbo boost can't remember off the top of my head but they are Gt1749 units good for around 200 hp. You will need to upgrade map sebsor if you are looking to get a bigger turbo and also injectors, clutch, intercooler etc have a look at some gt 2260 or 2257 or GTB even better. This has been done many many times

Also you won't see much difference in a generic map and custom for stage 1, but if you start modifying the engine then any map will have to be custom

thank you very much for the information, just need to find someone to do a file tune for me

[walshy155]

Plenty of good lads here in the forums mate just ask nicely

[8baller]

your file is already tuned, imo for stage 1+, quickly scanned it