Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Bench ZGW01 MOST Routing
20-07-2019, 16:10 PM,
Post: #1
XZBMW  Bench ZGW01 MOST Routing
Hi,

I got a ZGW01 High (61359213187) and i would like to use it in a bench setup for coding TV-modules (can't do it in car because car does not support TVT2).

My problem is that I need the MOST Bus routing but the MOST interface ist not on on the ZGW, it lights up on boot but then goes off.

If i run tool32 then it looks like the MOST is disabled, how can I enable it again?

tools32 -> status_mostsystem -> NetOff/ConfigNotOK ... I think that should be "NetOn/ConfigOk"

How can I enable MOST routing on my ZGW?

I tried to flash ist but al I got was loosing the Webinterface on TCP/IP port 80 on the ZGW IP which also shows routing status for MOST was off.
Quote this message in a reply
21-07-2019, 09:50 AM, (This post was last modified: 21-07-2019, 09:53 AM by BugFix.)
Post: #2
RE: Bench ZGW01 MOST Routing
test bench will be good smile
For TVT2 have to reflash ZGW1 to ZGW2 mode for nbt or any other HU for CAN2 or use ZGW without optic
Then connect HU and TVT2 use most optic cables directly without ZGW

NBTEVO, ENAV2, MGU  - CP OFF, Navi , APPS , Carplay, AA
MGU ID-8-9-10 Cars - Full Region change

NCD Secure Coding 2.0




Quote this message in a reply
21-07-2019, 13:44 PM,
Post: #3
RE: Bench ZGW01 MOST Routing
Thanks, but is there any way to use the optics from the ZGW?
My plan was to have a setup like it was in a F10 or so with CIC + ZGW + TVT2.

TVT2 only had MOST optics, no CAN, no FlexRey as far as I know. And with the TVT2 connced to NBT (in car BMW i3) it does not show up in E-Sys. This is why I guess I will need to use the ZGW on bench for this.

In an other car (E60) with CIC the TVT2 also can not be handled.

ZGW2 does not uses MOST optic as far as I know, how will this help?
Quote this message in a reply
21-07-2019, 21:27 PM, (This post was last modified: 21-07-2019, 21:32 PM by BugFix.)
Post: #4
RE: Bench ZGW01 MOST Routing
For you better use ZGW+HU+TVT2 connection

NBTEVO, ENAV2, MGU  - CP OFF, Navi , APPS , Carplay, AA
MGU ID-8-9-10 Cars - Full Region change

NCD Secure Coding 2.0




Quote this message in a reply
22-07-2019, 20:05 PM,
Post: #5
RE: Bench ZGW01 MOST Routing
what do you want to code on the TVT2 module?
Quote this message in a reply
28-07-2019, 12:40 PM,
Post: #6
RE: Bench ZGW01 MOST Routing
I have two TVT2 Modules. One is connected in E60 car with CIC and the other is connected to NBT in i3.
Both are "used" and working but behave different when I try to access the DVB-T2 CI/CAM Menu.
That's why I would like to review the CAFD with E-Sys.

Problem is that in the E60 the TVT2 was never avaiable also E-Sys does not work with E-Series so no way to do it there.

Same in i3, this car never had option for TV-module, but TVT2 is working. No ZGW in i3 just BDC but without MOST.
TVT2 is directly connectet to NBT but does not show up in E-Sys.
May I missed something in the i3 to have NBT working as MOST gateway?!

So my plan was to have ZGW01 (working as MOST Gateway) and TVT2 on bench for reading CAFD.

Or is it possible to use ICOM MOST adapter in E-Sys? 

Sorry for stupidy, I did not expect that this will be so complex. Because as I understood for full CIC/NBT bench setup just ZGW with CAN bridge is needed to send ignition on.

My guess was that it sould be dead simple to have the TVT2 working that way. Isn't it?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Tool for bench read 8hp Garryq 9 1,569 26-03-2024, 09:32 AM
Last Post: skywoker
  Bosch MEVD172H bench backup mrproper 1 249 23-03-2024, 18:43 PM
Last Post: Ratnik1990
XZBMW ENAV2 bench activation Airbus 10 799 25-02-2024, 08:17 AM
Last Post: jb2005
  Motronic 3.3.1 bench jaramillo 3 174 13-02-2024, 05:12 AM
Last Post: 2013m5
  Dde Coding/flash with esys in bench? ruben_17non 0 183 08-02-2024, 21:28 PM
Last Post: ruben_17non
  Entrynav2 - Trying to Trigger Component Protection on Bench 2002JCW 5 465 30-01-2024, 16:44 PM
Last Post: DEJMIEN
XZBMW NBT display on bench without unit djordan 4 324 15-01-2024, 08:08 AM
Last Post: Powerlab
XZBMW cas / cluster bench setup Cniksor 103 23,838 09-01-2024, 09:43 AM
Last Post: MIKUr1
  Entrynav2 bench Jalami 1 296 06-01-2024, 15:28 PM
Last Post: Airbus
XZBMW ID8 bench CID can not light bbw 3 466 12-12-2023, 20:36 PM
Last Post: Airbus

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content