[DesertDash]

Hi 2012 Toyota Corolla all keys lost.
Need assistance with immo reset please?
Want to add a G chip

[raffy haddad]

What eeprom device ?
Immobox number? 
Here try this file you should be ok 
If eeprom 93c66
After wrote file put everything in place
Put 1st key turn ign on for 5 second then turn off
Remove put second key also same
The with second key off on 5 to 6 time to close programming then it should start
Check immo light if off when insert key and car not start
Synchronise immo ecu
Don't forget to report back

[DesertDash]

Hi Raffy,

My apologies please see below:
Immo box no: 89780-12300
Eeprom: 93C66

Will key adaption work with one key only?

---

Hi Raffy file not working, security light flashes continuously.

[raffy haddad]

Of course untill you put g master key usually you need 3 keys to complete procedure 2 master and 1 valet key and when finish also need off on 5 times to close programming mode
The g chip data are encrypted .
With one key only turn ignition on for 5 second then not to off completly to 1 position 5 to 7 times rapidilly the light should goes off
If lights not off you need synchro immo ecu
Regards

Edit can you post your g chip data ?

[DesertDash]

Of course untill you put g master key usually you need 3 keys to complete procedure 2 master and 1 valet key and when finish also need off on 5 times to close programming mode
The g chip data are encrypted .
With one key only  turn ignition on for 5 second then not to off completly to 1 position 5 to 7 times rapidilly the light should goes off
If lights not off you need synchro immo ecu
Regards

Edit can you post your g chip data ?

Hi Raffy,
Still cant manage to add key manually, attached please find picture of key data will you please add it to the ori dump. 

[raffy haddad]

Your pg 1 37 belong to yaris g chip
Try generate transponder with pg 1 36 or 56
It should be ok
Manually can't because the file encrypted and key data from reading to put in file is different

[DesertDash]

Your pg 1 37 belong to yaris g chip
Try generate transponder  with pg 1  36 or 56
It should be ok
Manually can't because the file encrypted and key data from reading to put in file is different

Ok will try generating a transponder with KD X2 as its all i have. 

Any tool on the market that can do these toyota's via OBD?

[raffy haddad]

What tools do you have ?
X300 pro there is avideos on you tube
X100 pro should do also
Tango if you have authorisation should do
Kdx2 should have g chip generate
I don't have it