Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
SAAB trionic t7 9-3 2000 read with what?
|
01-08-2019, 06:02 AM,
Post: #1
|
|||
|
|||
|
SAAB trionic t7 9-3 2000 read with what?
Hi
I have to make immo off one Saab trionic t7.7 from a Saab 9-3 2000 model... Is this possible with galletto? I have see in manual they mention this ecu... Have anybody experience with that? I have read that ecu need specific tools to do the job, It is possible with "common" tool to immo off it? Thank you. |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
01-08-2019, 06:20 AM,
Post: #2
|
|||
|
|||
|
RE: SAAB trionic t7 9-3 2000 read with what?
Maybe Here
Pretty sure there was a version that used K KL cable.... |
|||
|
|
|
01-08-2019, 06:53 AM,
Post: #3
|
|||
|
|||
|
RE: SAAB trionic t7 9-3 2000 read with what?
Thank you...
elm 327 is ok?(that i use for fiat mes...) can work and with vag kkl? I don't want to brick the ecu... The immo is in flash or in mcu? |
|||
|
|
|
01-08-2019, 19:11 PM,
Post: #4
|
|||
|
|||
RE: SAAB trionic t7 9-3 2000 read with what?
(01-08-2019, 06:53 AM)victorysatgr Wrote: Thank you... Hi, Looks like they are using an ELM 327 on the Guides page. Not sure where IMMO is located. Have not used any of the Trionic flash soft. Good luck |
|||
|
|
|
01-08-2019, 21:37 PM,
Post: #5
|
|||
|
|||
|
RE: SAAB trionic t7 9-3 2000 read with what?
thanks again sparky....
i try on car with elm327... no luck... i try it on bench with elm, after i solder back the flash.... |
|||
|
|
|
02-08-2019, 08:19 AM,
Post: #6
|
|||
|
|||
|
RE: SAAB trionic t7 9-3 2000 read with what?
i have read flash.... is out there any chance for immo off???
|