Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Help changing NTG5 region using ECOM DOIP
02-08-2019, 22:18 PM,
(This post was last modified: 16-09-2019, 11:11 AM by fantomel.)
Post: #1
|
|||
|
|||
Help changing NTG5 region using ECOM DOIP
Hi
Does anyone have any experience changing region on NTG5 comand units please? I need to reprogram a ECE head unit for USA (to add the USA timezones etc) Have already installed USA navigation on it no problem. I have the required REGIO telematic disc, but dont have the skills to change it in DTS monaco (I dont know how to change the region or how to flash the files, am only used to xentry online scn coding) I was told the following "So first change region and then flash with Monaco over DOIP." I have DOIP ECOM all working OK with xentry, vediamo and DTS Can anyone help with this over teamviewer, am happy to pay, just let me know cost, thanks in advance |
|||
13-08-2019, 15:05 PM,
Post: #2
|
|||
|
|||
RE: Help changing NTG5 region using ECOM DOIP, will pay
no need any flashing just change region to usa in comand thats it
Skye:reshi1233 Mercedes Scn Coding 24/7 Add/Remove SA Codes to Vedoc/DataCard Retrofit Lights(ILS, Xenon ,Static ) Airbag and Mileage Correction Solutions |
|||
13-08-2019, 17:27 PM,
Post: #3
|
|||
|
|||
RE: Help changing NTG5 region using ECOM DOIP, will pay
|
|||
16-08-2019, 15:57 PM,
Post: #4
|
|||
|
|||
RE: Help changing NTG5 region using ECOM DOIP, will pay
100% works ece and usa conversion only coding
Ece to usa is only coding Skye:reshi1233 Mercedes Scn Coding 24/7 Add/Remove SA Codes to Vedoc/DataCard Retrofit Lights(ILS, Xenon ,Static ) Airbag and Mileage Correction Solutions |
|||
16-08-2019, 21:14 PM,
Post: #5
|
|||
|
|||
RE: Help changing NTG5 region using ECOM DOIP, will pay
easy to do it.. but he dont know..
Vediamo & DTS all version
eCOM with Xentry all version XENTRY Connect kit2/kit3 support |
|||
17-08-2019, 17:01 PM,
Post: #6
|
|||
|
|||
RE: Help changing NTG5 region using ECOM DOIP, will pay
|
|||
26-08-2019, 09:33 AM,
Post: #7
|
|||
|
|||
RE: Help changing NTG5 region using ECOM DOIP, will pay
(13-08-2019, 15:05 PM)Reshi Wrote: no need any flashing just change region to usa in comand thats it Is it the same if from eu to change to row (to install sea maps?) same by coding? Just using vediamo mvci? Thanks if you feel that I have in some way contributed / helped solve your issues/problems/requests, please do not forget to press thanks or rep button. Much appreciated.
|
|||
31-08-2019, 00:32 AM,
Post: #8
|
|||
|
|||
RE: Help changing NTG5 region using ECOM DOIP, will pay
We would be very grateful if you could tell us how to change the region of the actual unit.
We know how to change the region for navigation in Vediamo, the USA maps are installed and working fine. We are trying to change the base region of the unit from ECE to USA, that way when the firmware is flashed using monaco or vediamo, it supposedly loads all the correct files for the USA unit for example time zones and sirius satellite radio which is not available in europe) Even though the navigation region is changed in vediamo, when flashing with vediamo, monaco, or even with xentry, the software upgrades fine but leave all the european base settings, for example all the countries are over that side of the world , ie GMT GMT+1,2,3,4,5,6,7,8 etc The same USA head unit mostly has north and south american countries in the time zones, USA, Canada, Argentina etc, I was told it was possible to change the base region, but perhaps its not. Any more advice would be welcomed. |
|||
03-09-2019, 14:59 PM,
Post: #9
|
|||
|
|||
RE: Help changing NTG5 region using ECOM DOIP, will pay
If you reset the Comand Head unit and afterwards you try it?
Mercedes Benz Map activation codes at good prices
Ant region any system until NTG7 |
|||
03-09-2019, 17:31 PM,
Post: #10
|
|||
|
|||
RE: Help changing NTG5 region using ECOM DOIP, will pay
Yes have tried hard and soft reset first, still does not work
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content