Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

CANBUS emulator for bench test
03-08-2019, 21:17 PM,
Post: #1
XZBMW  CANBUS emulator for bench test
Can someone point me in the right direction for a CANBUS emulator for a bench test setup. I’m sure there must be cheap china versions kicking around. I’ve attached some links and a PDF, will these do the job?


Attached Files
IGNI-GENCAN.2.pdf
File Type: .pdf
Downloaded: 135 times
Size: 861.91 KB

Links.txt
File Type: .txt
Downloaded: 79 times
Size: 192 bytes


I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC
clapping BMW ISPI Admin Client License (Contact for info)
cheers Complete EntryNav2 FSC solution for Retrofit/Component Protection
enjoyKAFAS2 7E/BE/BF KAFAS4 11F/13E/13F
biggrin Carplay activations/FullScreen/ID4-5
rock EntryNav2 Carplay activations OEM/Provisioning
mail Contact me for more information
Quote this message in a reply
06-08-2019, 08:41 AM,
Post: #2
RE: CANBUS emulator for bench test
This emulator receive can signal, and put out normal 12V ingnition.
It is for normal radio mounted in car with can-bus(for example audi, vw or bmw)
Quote this message in a reply
[+] 1 user says Thank You to cursor for this post
06-08-2019, 08:54 AM,
Post: #3
RE: CANBUS emulator for bench test
(06-08-2019, 08:41 AM)cursor Wrote:  This emulator receive can signal, and put out normal 12V ingnition.
It is for normal radio mounted in car with can-bus(for example audi, vw or bmw)

Does that mean it would or would not be sufficient in a bench setup? Would it achieve the desired effect in a bench setup to code NBT/EVO?

I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC
clapping BMW ISPI Admin Client License (Contact for info)
cheers Complete EntryNav2 FSC solution for Retrofit/Component Protection
enjoyKAFAS2 7E/BE/BF KAFAS4 11F/13E/13F
biggrin Carplay activations/FullScreen/ID4-5
rock EntryNav2 Carplay activations OEM/Provisioning
mail Contact me for more information
Quote this message in a reply
07-08-2019, 05:26 AM,
Post: #4
RE: CANBUS emulator for bench test
(06-08-2019, 08:54 AM)DayvG Wrote:  
(06-08-2019, 08:41 AM)cursor Wrote:  This emulator receive can signal, and put out normal 12V ingnition.
It is for normal radio mounted in car with can-bus(for example audi, vw or bmw)

Does that mean it would or would not be sufficient in a bench setup? Would it achieve the desired effect in a bench setup to code NBT/EVO?

It work inverse that You need. 


Another option, You can use CAS and ZGW from car
Quote this message in a reply
[+] 1 user says Thank You to cursor for this post
07-08-2019, 07:55 AM,
Post: #5
RE: CANBUS emulator for bench test
(07-08-2019, 05:26 AM)cursor Wrote:  
(06-08-2019, 08:54 AM)DayvG Wrote:  
(06-08-2019, 08:41 AM)cursor Wrote:  This emulator receive can signal, and put out normal 12V ingnition.
It is for normal radio mounted in car with can-bus(for example audi, vw or bmw)

Does that mean it would or would not be sufficient in a bench setup? Would it achieve the desired effect in a bench setup to code NBT/EVO?

It work inverse that You need. 


Another option, You can use CAS and ZGW from car

Thanks mate, probably me not understanding, when you say it works inverse? What do you mean? This emulator will work and do the job of the CAS? Or I buy CAS and ZGW and do it that way.

I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC
clapping BMW ISPI Admin Client License (Contact for info)
cheers Complete EntryNav2 FSC solution for Retrofit/Component Protection
enjoyKAFAS2 7E/BE/BF KAFAS4 11F/13E/13F
biggrin Carplay activations/FullScreen/ID4-5
rock EntryNav2 Carplay activations OEM/Provisioning
mail Contact me for more information
Quote this message in a reply
07-08-2019, 09:24 AM,
Post: #6
RE: CANBUS emulator for bench test
When You change Oem radio in BMW E60 to non-OEM, You might have problem with "Ignition" wire in non-OEM radio. In car you have only consant +, without typical ignition like older models. Radio is turn on with CAN signal
If You use this emulator, it give you "ignition" signal from can signal.


You need inverse hardware. From typical "ignition" make correct CAN signal to turn on the OEM radio




Sorry for my english, I'm from Poland
Quote this message in a reply
20-08-2019, 10:51 AM,
Post: #7
RE: CANBUS emulator for bench test
You can use a Raspberry PI with a MCP2515 and TJA1050 based can bus shield to emulate ignition signal.
Quote this message in a reply
[+] 1 user says Thank You to joehsfonls for this post
20-08-2019, 10:54 AM,
Post: #8
RE: CANBUS emulator for bench test
(20-08-2019, 10:51 AM)joehsfonls Wrote:  You can use a Raspberry PI with a MCP2515 and TJA1050 based can bus shield to emulate ignition signal.

It would be great to see some pictures of your setup, I love a little project.

I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC
clapping BMW ISPI Admin Client License (Contact for info)
cheers Complete EntryNav2 FSC solution for Retrofit/Component Protection
enjoyKAFAS2 7E/BE/BF KAFAS4 11F/13E/13F
biggrin Carplay activations/FullScreen/ID4-5
rock EntryNav2 Carplay activations OEM/Provisioning
mail Contact me for more information
Quote this message in a reply
20-08-2019, 11:06 AM,
Post: #9
RE: CANBUS emulator for bench test
I have no picture but here is the instructions to build. And a link to the shield that I use. This is available on AliExpress and co. I hope it is ok to post the links?


Attached Files
canbus-link.txt
File Type: .txt
Downloaded: 75 times
Size: 238 bytes

Quote this message in a reply
[+] 1 user says Thank You to joehsfonls for this post
20-08-2019, 12:06 PM,
Post: #10
RE: CANBUS emulator for bench test
Thanks mate, much appreciated. I have a Pi that I use as a games emulator, I’ll have to try and work this out. Looking at that board, does the USB attach to the Pi? And the pins connect to setup? I’ve looked at the schematic and can’t work it out just yet. Looks like it’s time to start researching smile

I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC
clapping BMW ISPI Admin Client License (Contact for info)
cheers Complete EntryNav2 FSC solution for Retrofit/Component Protection
enjoyKAFAS2 7E/BE/BF KAFAS4 11F/13E/13F
biggrin Carplay activations/FullScreen/ID4-5
rock EntryNav2 Carplay activations OEM/Provisioning
mail Contact me for more information
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Tool for bench read 8hp Garryq 9 1,572 26-03-2024, 09:32 AM
Last Post: skywoker
  Bosch MEVD172H bench backup mrproper 1 249 23-03-2024, 18:43 PM
Last Post: Ratnik1990
XZBMW ENAV2 bench activation Airbus 10 801 25-02-2024, 08:17 AM
Last Post: jb2005
  Motronic 3.3.1 bench jaramillo 3 174 13-02-2024, 05:12 AM
Last Post: 2013m5
  Dde Coding/flash with esys in bench? ruben_17non 0 183 08-02-2024, 21:28 PM
Last Post: ruben_17non
  Entrynav2 - Trying to Trigger Component Protection on Bench 2002JCW 5 465 30-01-2024, 16:44 PM
Last Post: DEJMIEN
  Bmw/Mini cic/champ emulator e9x 66x Rxx megalo84 4 283 29-01-2024, 22:14 PM
Last Post: miskoh
XZBMW 2024 Headlight emulator for X5/X6 (M) 21-23 cars WorkB23 1 289 27-01-2024, 11:13 AM
Last Post: EngineerX
XZBMW NBT display on bench without unit djordan 4 324 15-01-2024, 08:08 AM
Last Post: Powerlab
XZBMW cas / cluster bench setup Cniksor 103 23,845 09-01-2024, 09:43 AM
Last Post: MIKUr1

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content