[Black Alien]

hello friends.,

Could anyone help me with a working ecu dump for suzuki swift 2007..Actually I was doing all keys lost on OBD and I the only option to add keys was to erase first then add...erase was successful but adding key failed. Now I extracted ecu 93a56 to make keys by dump and Tango says UNKNOWN DUMP..is it because I erased the keys? I have done swift before using tango but the eeprom was 93c66..

here is my dump

[fathead32]

Having a sort of similar problem , what did you use to read immo info, have several programmers none can read this car immobilizer "fail to communicate " but can read diagnostic info

[raffy haddad]

Hello best thing is to read infos by reading eeprom by programmer and save orig file then use key maker to make transponder
Obd tools are easy and time save
But sometimes its gives you headaches as black allien now

[Black Alien]

Having a sort of similar problem , what did you use to read immo info, have several programmers none can read this car immobilizer "fail to communicate " but can read diagnostic info

I used UPA serial programmer... I have read this immobilizer before and programmed a lot of swift using Tango without a fail...it uses pcf 7936 ID 46. But this one is one kind different

---

Hello best thing is to read infos by reading eeprom by programmer and save orig file then use key maker to make transponder
Obd tools are easy and time save
But sometimes its gives you headaches as black allien now

I did and it was all succefull..I even made 4 keys from the dump and write them back in the eeprom. But the Immo light will still blink...I diagnosed it with Autel 906 BT and i get code P1614 (unknown response from transponder) and I am so confused Raffy Haddad

[raffy haddad]

The dump that you posted is all 0000000 except the first 2 bit

[Black Alien]

The dump that you posted is all 0000000 except the first 2 bit

Yes i know it was 0000 excerpt the 2 lines.. it was because i tried all keys lost that erases all keys on obd before reading the original file. i read the file after unsuccessful attempt to program the key on obd. then I copied file from other dead ecu of same car and tried to program key on bench...I made 4 keys but none worked. I did not post the key files here for I thought maybe you guys could generate a working file for the ecu after ease of keys

---

Problem Solved
what I did:

1. I had to be so naughty by trying more ideas. I tried immo off using Immo service tool 1.2
2. After generating immo off file I wrote back in the eeprom and tried the car.....it did not start. the immo light was solid
3. I tried programming again using Xtool x100 pro..
4. entered security code given.. went to all keys lost....and program was success
5. The car has started and the client is on his way..

Thanks Raffy

thanks Team CarTechnology!