[muskatas]

I did it on a F30.Probably when you turn on heat for passenger,its work for driver, and the same way for driver button.You need switching sides of yellow underseat connectors.Right one should be under passenger seat.

No, You have to modify wiring. Simply add additional GND and for other seat remove. car identifies LH or RH for seat heating with additional ground for seat module.

[pablito94]

I did it on a F30.Probably when you turn on heat for passenger,its work for driver, and the same way for driver button.You need switching sides of yellow underseat connectors.Right one should be under passenger seat.

No, You have to modify wiring. Simply add additional GND and for other seat remove. car identifies LH or RH for seat heating with additional ground for seat module.

I have already done it. Now seat are recognised properly as driver (left) and passenger (right) but when I want to move seats forward,it goes backward (both seats) and additional to this I have LIN fault for seats panel adjustment. I don’t know what’s wrong because before conversion my “Active seats” were working without any issue. . Same situation with heating and IHKA - coded but no change it means seats heating works for opposite and when I set temperature for left side,right side is set. 

Any help please ?

[pablito94]

Sorted ! Everything works as should be !