[Viper1989]

Hi everybody
Do you know how to configure in IDS more power on engone?
I saw some procedure like mondeo mk5 was increased engine power from 150ps to 180ps and works more more better and all modules were clear without dtc. Only PCM config via obd or more complicated?

[spacie2136]

1. Buy tool for reading your ECU over OBD or on Bench. (Depends on your ECU model)
2. Readout your car with that tool
3. Send file to a tuner, to this forum or tune your self with WinOLS
4. Write file back to your car
5. Enjoy your horses

[treble6]

you can do it with ford ids
look for calibration number for same engine but higher hp or you can load .ab file with vin from updated car .
i had a connect 90hp after i used a differant calibration it went to 110.

transit 100hp van the 155 calibration can be used
then tuned to 180

[Viper1989]

you can do it with ford ids
look for calibration number for same engine but higher hp or you can load .ab file with vin from updated car .
i had a connect 90hp after i used a differant calibration it went to 110.

transit 100hp van the 155 calibration can be used
then tuned to 180

Exactly, my friend made it in mondeo by IDS ( in some ford tuners). And I would like to investigate how?
Is there option just only choose or have to make additional moves?

Spacie2136
I know what you mean, kees or K-Tag, but mine question was how to increase power originally by just only choosing optional powers.