Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Reading Code pin code from BSI tool?
15-08-2019, 21:30 PM,
Post: #1
PPeugeot  Reading Code pin code from BSI tool?
Hi Guys,

Need some advice on getting my pin code for a 308 2.0 HDi 2010 came with one key i have a blank and got it
cut the place told me to get my dealer to get the pin code but they cant get the code without paying £150.
and they need the car for a few hours. 

i have a tool EZP2010 am not sure if that would read the BSI Dump? and were i would be looking so any
advice would be great and thanks for your time.

Max
Quote this message in a reply
15-08-2019, 22:17 PM,
Post: #2
RE: Reading Code pin code from BSI tool?
hey,inthat case you will need TOOLS Like SMOK TOOL , or others or you read the inside eeprom and send it to me i would be glad to help.
Quote this message in a reply
[+] 1 user says Thank You to GUENDOUZI001 for this post
16-08-2019, 05:41 AM,
Post: #3
RE: Reading Code pin code from BSI tool?
Read your bsi eeprom and post here
Alots of members will be happy to help you
If its for your own car but if this is your job
You need tools and $$$$$$
Regards

[Image: OxNUyuy.jpg]  time  Always new stuff to learn  biggrin
Skype: raffy.haddad
File services : multi brand ecu immo off , VW solutions : immo transfer immo off ,  pcr 2.1 immo , BMW EDC16 IMMO OFF , ....
Yamaha smart key supply pin code from dump ( TMAX , XMAX  ) 
Chevrolet simens sirus D3x D4x D5x
delphi MR 140  IMMOOFF


I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT 
Members who not report back they're name will be black listed on my list









Reputation: +1 - Le-Mans [+1]
Quote this message in a reply
[+] 2 users say Thank You to raffy haddad for this post
16-08-2019, 19:22 PM,
Post: #4
RE: Reading Code pin code from BSI tool?
Hello,Max2k

If you have good skill on soldering, go ahead and read dump file, I m sure someone here can get for you Pincode from EEPROM Dump file, like our friend raffy haddad. If you don't mind about $$$..just find someones that have Lonsdor K518, it can read your pin code in a minute. I have done it before using this tool with OBD2 socket on Lonsdor K518MSV version without to remove EEPROM from BSI Box.

Good Luck. Regards
Quote this message in a reply
[+] 1 user says Thank You to Lanefi for this post
16-08-2019, 22:10 PM,
Post: #5
RE: Reading Code pin code from BSI tool?
Hi guys.

thanks for the reply's am looking to get the tool to read the dump and something that is cheap as its only for my own car as i would like to get another key any local places can clone the key but they cant
get the remote to work. am not to bad with a soldering iron i have a hot air gun for doing SMD work again am not the best as i have only started to get into this for my own education.

I have a spare car 307 i can practice on before it goes to the scrap yard i would rather try on that than my own but it would give me a idea for my own. i would like to read it from the BSI then the ECU but the ecu in mine is the delphi 3.4 i think i need to remove the security bolts to remove.

on the EZP2010 it can only read 23xx 24xx 93xx from looking around the BSI uses a 95xx Chip?

i cant find a tool to read that but seen a guide how to use a CH341A usb and convert it to read the 95xx.


thanks again guys
Quote this message in a reply
09-01-2023, 22:52 PM,
Post: #6
RE: Reading Code pin code from BSI tool?
(16-08-2019, 22:10 PM)Max2k Wrote:  i cant find a tool to read that but seen a guide how to use a CH341A usb and convert it to read the 95xx.

I realise this is an old post so you may not see / respond, but where did you find guide to convert CH341A USB Programmer?

Password for anything I share here is: jtanner_IAmOrion_cartechnology.co.uk
Quote this message in a reply
15-01-2023, 16:10 PM, (This post was last modified: 15-01-2023, 16:10 PM by atiwok.)
Post: #7
RE: Reading Code pin code from BSI tool?
check NeoProgrammer, it has pdf with instruction to modify CH341A, i've tried, but does not work for me, still cannot read these eeproms


Attached Files
neo.txt
File Type: .txt
Downloaded: 7 times
Size: 53 bytes

Quote this message in a reply
[+] 2 users say Thank You to atiwok for this post
15-01-2023, 17:57 PM,
Post: #8
RE: Reading Code pin code from BSI tool?
(15-01-2023, 16:10 PM)atiwok Wrote:  check NeoProgrammer, it has pdf with instruction to modify CH341A, i've tried, but does not work for me, still cannot read these eeproms

Thanks. I did actually find the post in the end and it worked correctly for me. I did have to take the eeprom chip OFF the board though using my hot air station. With the chip still on the board it won’t read properly, if at all!

Password for anything I share here is: jtanner_IAmOrion_cartechnology.co.uk
Quote this message in a reply
16-01-2023, 06:49 AM,
Post: #9
RE: Reading Code pin code from BSI tool?
Proper tools like Lonsdor,IM508,KM100 will do this job in a second by OBD .If this is a customer car you would better get proper tools to make your life easier .I use to make PSA keys this way (removing BSI and retrieving code by eeprom) but this was 7 years ago .
Quote this message in a reply
16-01-2023, 15:47 PM,
Post: #10
RE: Reading Code pin code from BSI tool?
(16-01-2023, 06:49 AM)12manux Wrote:  Proper tools like Lonsdor,IM508,KM100 will do this job in a second by OBD .If this is a customer car you would better get proper tools to make your life easier .I use to make PSA keys this way (removing BSI and retrieving code by eeprom) but this was 7 years ago .

Unfortunately not all of us - especially me, can afford these tools. I'm was just doing my own car (well, my Dads in this case) so not a customers.  I really wish there were cheaper ways of doing it laughing  but then I suppose IMMO stuff is *NOT* meant for anyone at home to buy one and try

Password for anything I share here is: jtanner_IAmOrion_cartechnology.co.uk
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
PCitroen Citroen Jumper pin code zmann 4 102 21-03-2024, 06:49 AM
Last Post: zmann
0Immo NEW EASY IMMO DOCTOR 2.1 Multi Immo Tool.+ KG ROD-BENDERS 44 10,061 17-03-2024, 14:52 PM
Last Post: kar407
  PIN code VW Polo ECU magneti marelli IAW4MV.dd from dump alkazav 1 61 14-03-2024, 10:33 AM
Last Post: legze
  NV400 2018 BCM-N3 PIN code needed! parvanov3 0 42 13-03-2024, 11:04 AM
Last Post: parvanov3
  OPEL grandland Med17.4.4 need pinout and recomand tool to read fadyeid 0 45 11-03-2024, 16:12 PM
Last Post: fadyeid
ORenult Renault IMMO code 39 digits Renault2_DFlash.bin massilos 18 5,247 08-03-2024, 15:56 PM
Last Post: AUTOADRIAN
  Key Programming Tool koziol 1 126 06-03-2024, 07:22 AM
Last Post: TKservice
0Immo Car-Edit tool - dash ecu bsm srs immo ROD-BENDERS 31 8,383 05-03-2024, 21:01 PM
Last Post: keyzex
  VAG IMMO OFF TOOL for free josef1708 6 1,820 03-03-2024, 09:42 AM
Last Post: josef1708
  PSA MD1CS003 PIN CODE CHIKODIAG 2 130 03-03-2024, 01:14 AM
Last Post: volavka

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content