Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Reading Code pin code from BSI tool?
15-08-2019, 21:30 PM,
Post: #1
|
|||
|
|||
Reading Code pin code from BSI tool?
Hi Guys,
Need some advice on getting my pin code for a 308 2.0 HDi 2010 came with one key i have a blank and got it cut the place told me to get my dealer to get the pin code but they cant get the code without paying £150. and they need the car for a few hours. i have a tool EZP2010 am not sure if that would read the BSI Dump? and were i would be looking so any advice would be great and thanks for your time. Max |
|||
15-08-2019, 22:17 PM,
Post: #2
|
|||
|
|||
RE: Reading Code pin code from BSI tool?
hey,inthat case you will need TOOLS Like SMOK TOOL , or others or you read the inside eeprom and send it to me i would be glad to help.
|
|||
16-08-2019, 05:41 AM,
Post: #3
|
|||
|
|||
RE: Reading Code pin code from BSI tool?
Read your bsi eeprom and post here
Alots of members will be happy to help you If its for your own car but if this is your job You need tools and $$$$$$ Regards Always new stuff to learn
Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
Reputation: +1 - Le-Mans [+1] | |||
16-08-2019, 19:22 PM,
Post: #4
|
|||
|
|||
RE: Reading Code pin code from BSI tool?
Hello,Max2k
If you have good skill on soldering, go ahead and read dump file, I m sure someone here can get for you Pincode from EEPROM Dump file, like our friend raffy haddad. If you don't mind about $$$..just find someones that have Lonsdor K518, it can read your pin code in a minute. I have done it before using this tool with OBD2 socket on Lonsdor K518MSV version without to remove EEPROM from BSI Box. Good Luck. Regards |
|||
16-08-2019, 22:10 PM,
Post: #5
|
|||
|
|||
RE: Reading Code pin code from BSI tool?
Hi guys.
thanks for the reply's am looking to get the tool to read the dump and something that is cheap as its only for my own car as i would like to get another key any local places can clone the key but they cant get the remote to work. am not to bad with a soldering iron i have a hot air gun for doing SMD work again am not the best as i have only started to get into this for my own education. I have a spare car 307 i can practice on before it goes to the scrap yard i would rather try on that than my own but it would give me a idea for my own. i would like to read it from the BSI then the ECU but the ecu in mine is the delphi 3.4 i think i need to remove the security bolts to remove. on the EZP2010 it can only read 23xx 24xx 93xx from looking around the BSI uses a 95xx Chip? i cant find a tool to read that but seen a guide how to use a CH341A usb and convert it to read the 95xx. thanks again guys |
|||
09-01-2023, 22:52 PM,
Post: #6
|
|||
|
|||
RE: Reading Code pin code from BSI tool?
(16-08-2019, 22:10 PM)Max2k Wrote: i cant find a tool to read that but seen a guide how to use a CH341A usb and convert it to read the 95xx. I realise this is an old post so you may not see / respond, but where did you find guide to convert CH341A USB Programmer? Password for anything I share here is: jtanner_IAmOrion_cartechnology.co.uk
|
|||
15-01-2023, 16:10 PM,
(This post was last modified: 15-01-2023, 16:10 PM by atiwok.)
Post: #7
|
|||
|
|||
RE: Reading Code pin code from BSI tool?
check NeoProgrammer, it has pdf with instruction to modify CH341A, i've tried, but does not work for me, still cannot read these eeproms
|