Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Bmw f31 kafas2 5AS error
17-08-2019, 10:17 AM,
Post: #21
RE: Bmw f31 kafas2 5AS error
(17-08-2019, 10:04 AM)maxwell4321 Wrote:  
(17-08-2019, 09:31 AM)DayvG Wrote:  
(17-08-2019, 06:46 AM)maxwell4321 Wrote:  
(16-08-2019, 22:01 PM)DayvG Wrote:  
(16-08-2019, 20:40 PM)maxwell4321 Wrote:  5AS retrofit requires some FDL codings particularly for the ICM, just VO coding the modules is not enough to activate it correctly

That’s good to know, I’m running out of suggestions haha

Also I notice OP's car is 2013 the ICM needs to be from a later car 2014 + so requires changing.

That would make sense. I’m assuming because the ICM will send braking signals to the DSC. I had already retrofitted ACC to my F10 before I fitted the KAFAS2 so already had the correct part. 

If I’m not mistaken the collision/pedestrian detection will automatically brake the car if required I’ve attached the parts list for the ICM high. Part 9. Looks like more work for the OP.

Yes the ICM sends signals to DSC, because 5AS was not available pre 2014 the ICMs before that date do not have the correct functionality.

(17-08-2019, 07:31 AM)gvitkis Wrote:  
(17-08-2019, 06:46 AM)maxwell4321 Wrote:  
(16-08-2019, 22:01 PM)DayvG Wrote:  
(16-08-2019, 20:40 PM)maxwell4321 Wrote:  5AS retrofit requires some FDL codings particularly for the ICM, just VO coding the modules is not enough to activate it correctly

That’s good to know, I’m running out of suggestions haha

Also I notice OP's car is 2013 the ICM needs to be from a later car 2014 + so requires changing.


Hi, could you share the various FDL codes?  I too am in the same situation as the first post.

I cannot share the codings publicly, myself and 2 other guys spent around 3 months figuring it out and one of the others who came up with the final coding solution requested that we do not make them public. We did it on F10, F11 and F13 but the codings are very similar to F30 etc.
However if you let me have your CAFDs for ICM, DSC, HU, Kombi, Kafas and FEM I will gladly check/edit them for you

Just looking at the ETK, the ICM is listed for 5DF ACC, which was available for the pre and LCI. I think the OP would just need to ensure he gets an ICM high for his car which is denoted with V5.6 on the ICM ECU itself. The basic low version is V1.3

I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC
clapping BMW ISPI Admin Client License (Contact for info)
cheers Complete EntryNav2 FSC solution for Retrofit/Component Protection
enjoyKAFAS2 7E/BE/BF KAFAS4 11F/13E/13F
biggrin Carplay activations/FullScreen/ID4-5
rock EntryNav2 Carplay activations OEM/Provisioning
mail Contact me for more information
Quote this message in a reply
[+] 1 user says Thank You to DayvG for this post
17-08-2019, 11:05 AM,
Post: #22
RE: Bmw f31 kafas2 5AS error
to move from ICM to newer and possible? ICM of a 2018 f20 will fit on mine?
Quote this message in a reply
17-08-2019, 11:10 AM, (This post was last modified: 17-08-2019, 11:15 AM by DayvG.)
Post: #23
RE: Bmw f31 kafas2 5AS error
(17-08-2019, 11:05 AM)Pedrom92 Wrote:  to move from ICM to newer and possible?  ICM of a 2018 f20 will fit on mine?

I have posted links to the correct part numbers and what you need to check. It’s not my retrofit so I don’t care which part you fit, but if you want it to work, research and check the part numbers from the ETK list I posted and cross reference them to the part numbers of parts you have found. Put simply, buy a part listed in the ETK that is for 5DF for your vehicle.

(17-08-2019, 10:04 AM)maxwell4321 Wrote:  
(17-08-2019, 09:31 AM)DayvG Wrote:  
(17-08-2019, 06:46 AM)maxwell4321 Wrote:  
(16-08-2019, 22:01 PM)DayvG Wrote:  
(16-08-2019, 20:40 PM)maxwell4321 Wrote:  5AS retrofit requires some FDL codings particularly for the ICM, just VO coding the modules is not enough to activate it correctly

That’s good to know, I’m running out of suggestions haha

Also I notice OP's car is 2013 the ICM needs to be from a later car 2014 + so requires changing.

That would make sense. I’m assuming because the ICM will send braking signals to the DSC. I had already retrofitted ACC to my F10 before I fitted the KAFAS2 so already had the correct part. 

If I’m not mistaken the collision/pedestrian detection will automatically brake the car if required I’ve attached the parts list for the ICM high. Part 9. Looks like more work for the OP.

Yes the ICM sends signals to DSC, because 5AS was not available pre 2014 the ICMs before that date do not have the correct functionality.

(17-08-2019, 07:31 AM)gvitkis Wrote:  
(17-08-2019, 06:46 AM)maxwell4321 Wrote:  
(16-08-2019, 22:01 PM)DayvG Wrote:  
(16-08-2019, 20:40 PM)maxwell4321 Wrote:  5AS retrofit requires some FDL codings particularly for the ICM, just VO coding the modules is not enough to activate it correctly

That’s good to know, I’m running out of suggestions haha

Also I notice OP's car is 2013 the ICM needs to be from a later car 2014 + so requires changing.


Hi, could you share the various FDL codes?  I too am in the same situation as the first post.

I cannot share the codings publicly, myself and 2 other guys spent around 3 months figuring it out and one of the others who came up with the final coding solution requested that we do not make them public. We did it on F10, F11 and F13 but the codings are very similar to F30 etc.
However if you let me have your CAFDs for ICM, DSC, HU, Kombi, Kafas and FEM I will gladly check/edit them for you

3 months?!? I installed the new ICM, DSC, ACC sensor, PMA, SZL, KAFAS2 VO coded the ECU’s and it all works first time with no errors. The only change to ICM I made was for auto PDC and that wasn’t difficult. What did you spend 3 months doing?!? I have an F10 and these retrofits were simple, albeit time consuming. The only issue I had was with ICM to ACSM wiring for which there is a thread here. The solution was given in the first few posts which would’ve worked if I’d followed it properly.

I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC
clapping BMW ISPI Admin Client License (Contact for info)
cheers Complete EntryNav2 FSC solution for Retrofit/Component Protection
enjoyKAFAS2 7E/BE/BF KAFAS4 11F/13E/13F
biggrin Carplay activations/FullScreen/ID4-5
rock EntryNav2 Carplay activations OEM/Provisioning
mail Contact me for more information
Quote this message in a reply
17-08-2019, 11:38 AM,
Post: #24
RE: Bmw f31 kafas2 5AS error
I will try to find a newer ICM to try.
Quote this message in a reply
17-08-2019, 11:42 AM,
Post: #25
RE: Bmw f31 kafas2 5AS error
(17-08-2019, 11:38 AM)Pedrom92 Wrote:  I will try to find a newer ICM to try.

Make sure the parts number matches exactly as per the ETK, there are lots of options available and you need to make sure it’s correct.

I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC
clapping BMW ISPI Admin Client License (Contact for info)
cheers Complete EntryNav2 FSC solution for Retrofit/Component Protection
enjoyKAFAS2 7E/BE/BF KAFAS4 11F/13E/13F
biggrin Carplay activations/FullScreen/ID4-5
rock EntryNav2 Carplay activations OEM/Provisioning
mail Contact me for more information
Quote this message in a reply
17-08-2019, 12:51 PM,
Post: #26
RE: Bmw f31 kafas2 5AS error
It's a very expensive part. I will really just be with the 5AD.
Quote this message in a reply
17-08-2019, 13:17 PM,
Post: #27
RE: Bmw f31 kafas2 5AS error
Check sellers on Allegro, you will find it cheaper. Retrofitting parts is expensive.

I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC
clapping BMW ISPI Admin Client License (Contact for info)
cheers Complete EntryNav2 FSC solution for Retrofit/Component Protection
enjoyKAFAS2 7E/BE/BF KAFAS4 11F/13E/13F
biggrin Carplay activations/FullScreen/ID4-5
rock EntryNav2 Carplay activations OEM/Provisioning
mail Contact me for more information
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  BMW E83 A1 error - MRS: No message from DSC ... ivanp 22 905 Yesterday, 22:09 PM
Last Post: ivanp
  F15 6WB Retrofit VIN Error moreply 4 177 25-03-2024, 07:24 AM
Last Post: RuleNormaliai
XZBMW F15 Programming Error mcrussell 7 387 20-03-2024, 05:38 AM
Last Post: SweetBMW
  NBT EVO HW4.1 CheckMemory Error moreply 10 465 19-03-2024, 19:43 PM
Last Post: moreply
XZBMW xdrive off with esys without error in dash dankocg 11 2,271 14-03-2024, 13:41 PM
Last Post: Adekborys69
XZBMW G31 LCI Tail Lights retrofit coding error tste1982 27 1,815 10-03-2024, 21:29 PM
Last Post: vanos
  Esys I-Step error adamnewport 10 413 08-03-2024, 09:07 AM
Last Post: Hoborg
XZBMW psdz error furnpick 4 130 05-03-2024, 15:20 PM
Last Post: furnpick
XSMini DSC Module Coding - Error 5DE3 TLG 3 154 24-02-2024, 07:47 AM
Last Post: Stratofortress
  E114A3 Error SeatBelt Acsm Issue after flash Billyjoe69 2 295 20-02-2024, 17:09 PM
Last Post: cedchung

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content