Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Lexia FullChip don't work, please help me solve the issue
17-08-2019, 05:40 AM,
Post: #4
|
|||
|
|||
RE: Lexia FullChip don't work, please help me solve the issue
1. Your serial use to be one that it can let you use Diagbox versions after v5.29 ( one of the serials are not alloed to be used and for this there is a solution to change the S/N )
2. Each version of the Diagbox it is using a diffrent firmware version. So you need to flash your tool with that firmware version only ) 3. You have to plug the interface to the car and then to the USB first. Then turn the ignision ON. And in the end start the Diagbox and do a diagnostic. 4. PSA Interface checked cannot be installed near the Diagbox. 5. Maybe there is hardware issue and you have to check it in a few other diffrent cars to be sure of this. Good luck |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Lexia FullChip don't work, please help me solve the issue - by no_name - 17-08-2019, 00:31 AM
RE: Lexia FullChip don't work, please help me solve the issue - by Max2k - 17-08-2019, 03:53 AM
RE: Lexia FullChip don't work, please help me solve the issue - by no_name - 17-08-2019, 03:57 AM
RE: Lexia FullChip don't work, please help me solve the issue - by mattydr67 - 17-08-2019, 05:40 AM
RE: Lexia FullChip don't work, please help me solve the issue - by no_name - 17-08-2019, 21:23 PM
RE: Lexia FullChip don't work, please help me solve the issue - by Simple - 18-08-2019, 03:05 AM
RE: Lexia FullChip don't work, please help me solve the issue - by no_name - 18-08-2019, 18:27 PM
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Which Lexia 3 is the best on Aliexpress | chris007 | 3 | 247 |
12-12-2023, 10:21 AM Last Post: superpjok |
|
Lexia fault. Winlex doesnt work anymore | Renopower | 4 | 445 |
18-11-2023, 20:16 PM Last Post: vagvag |
|
Low beam issue wiring diagram | lexuuuu | 0 | 126 |
02-11-2023, 18:00 PM Last Post: lexuuuu |
|
Citroen Lexia (software) | ajpds | 1 | 555 |
23-07-2023, 18:43 PM Last Post: J415UNNY |
|
DiagBox 09.129 clone not work | Renopower | 8 | 1,759 |
27-08-2022, 22:18 PM Last Post: zmann |
|
climate control issue by water | Satia | 0 | 367 |
14-02-2022, 17:19 PM Last Post: Satia |
|
Reflash lexia interface from B to C | lionofthedesert | 59 | 40,501 |
18-08-2019, 15:24 PM Last Post: no_name |
|
Lexia interface recognization problem | Jedrek | 2 | 1,633 |
30-06-2019, 20:35 PM Last Post: Joda |
|
LEXIA 3 DIAGBOX SAYS CONNECT VCI | Mohamed.Ar | 3 | 5,371 |
24-06-2019, 20:36 PM Last Post: pica14 |
|
Lexia & PP2000 update 8.47-8.50 (DiagBox v8.50) | Simple | 21 | 13,394 |
14-05-2019, 12:49 PM Last Post: mattdj |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content