Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Problem Derelek USB Diag 3 - DDT2000.
18-08-2019, 20:39 PM,
Post: #1
Problem Derelek USB Diag 3 - DDT2000.
Hi to everyone.

I have a derelek interface and i have a question and a problem in the same time, maybe some one have any idea about that.

I tried with different versions od DB, but every time i have the same problem, majority of ecus are not complete identified and i can't access and make any change on them. 

When i try to identify manually an ecu, every time i received error 1013.
In this moment i have the complete database from 2018, and my car is from 2018, Logan X52, theoretical it's ok, but practical surprise, no.


Any idea what can be the cause of this problem ?

Thank's.


Attached Files Thumbnail(s)
   
Quote this message in a reply
19-08-2019, 08:21 AM,
Post: #2
RE: Problem Derelek USB Diag 3 - DDT2000.
Cable defect? Maybe wire defect, never see that mesage.
Try other database, with this 3.0.3 versioni have never any problem.
Only some cars he did not recognized navi
Quote this message in a reply
19-08-2019, 14:53 PM,
Post: #3
RE: Problem Derelek USB Diag 3 - DDT2000.
I can give you a link to database 7/2019.Just to try out.Have you tried on older cars? hi
Quote this message in a reply
[+] 1 user says Thank You to jure5j for this post
19-08-2019, 22:40 PM,
Post: #4
RE: Problem Derelek USB Diag 3 - DDT2000.
(19-08-2019, 08:21 AM)Renopower Wrote:  Cable defect? Maybe wire defect, never see that mesage.
Try other database, with this 3.0.3 versioni have never any problem.
Only some cars he did not recognized navi

Cable is ok, because the ddt identify derelek interface, and of all ecus, i successful to identify 2 of them. I tried with other database, but the result is the same.

I can see some errors from ecu, but nothing complete and interesting.

(19-08-2019, 14:53 PM)jure5j Wrote:  I can give you a link to database 7/2019.Just to try out.Have you tried on older cars? hi

Thanks, but with all versions I've tried, nothing have successful.
At first i was thinking the problem was from my DB, but after i change 3-4 versions, the result was the same. Most probably are some details that I miss. 
A question: it's possible to be a difference of some xml file between two database, except the new products ?
For example a cluster with the same name in two different database, are different one of other ?

I tried on old cars, Logan MCV X52 from 2014, but the same result.


Attached Files Thumbnail(s)
       
Quote this message in a reply
20-08-2019, 18:22 PM,
Post: #5
RE: Problem Derelek USB Diag 3 - DDT2000.
(19-08-2019, 22:40 PM)al3xand3r Wrote:  
(19-08-2019, 08:21 AM)Renopower Wrote:  Cable defect? Maybe wire defect, never see that mesage.
Try other database, with this 3.0.3 versioni have never any problem.
Only some cars he did not recognized navi

Cable is ok, because the ddt identify derelek interface, and of all ecus, i successful to identify 2 of them. I tried with other database, but the result is the same.

I can see some errors from ecu, but nothing complete and interesting.

(19-08-2019, 14:53 PM)jure5j Wrote:  I can give you a link to database 7/2019.Just to try out.Have you tried on older cars? hi

Thanks, but with all versions I've tried, nothing have successful.
At first i was thinking the problem was from my DB, but after i change 3-4 versions, the result was the same. Most probably are some details that I miss. 
A question: it's possible to be a difference of some xml file between two database, except the new products ?
For example a cluster with the same name in two different database, are different one of other ?

I tried on old cars, Logan MCV X52 from 2014, but the same result.

thinking 
I connected my derelek to Renault Kangoo 2018 with DDT2000 version 3.0.2.9(I believe is newer that the one you use) and database 12/2018 and had no problems with recognizing the ecus in the car.
Quote this message in a reply
21-08-2019, 23:32 PM,
Post: #6
RE: Problem Derelek USB Diag 3 - DDT2000.
(20-08-2019, 18:22 PM)jure5j Wrote:  thinking 
I connected my derelek to Renault Kangoo 2018 with DDT2000 version 3.0.2.9(I believe is newer that the one you use) and database 12/2018 and had no problems with recognizing the ecus in the car.

Yes, the version 3.0.2.9 is newer like mine, i use 3.0.0.3. 
I didn't identify anything yet what can cause that.
I will try tomorrow with 3.0.2.9 and my data base with another notebook, it's possible the problem to be from my pc.
If the problem persist, i will write you, to send me a link with your db.
Quote this message in a reply
06-09-2019, 20:42 PM,
Post: #7
RE: Problem Derelek USB Diag 3 - DDT2000.
(21-08-2019, 23:32 PM)al3xand3r Wrote:  
(20-08-2019, 18:22 PM)jure5j Wrote:  thinking 
I connected my derelek to Renault Kangoo 2018 with DDT2000 version 3.0.2.9(I believe is newer that the one you use) and database 12/2018 and had no problems with recognizing the ecus in the car.

Yes, the version 3.0.2.9 is newer like mine, i use 3.0.0.3. 
I didn't identify anything yet what can cause that.
I will try tomorrow with 3.0.2.9 and my data base with another notebook, it's possible the problem to be from my pc.
If the problem persist, i will write you, to send me a link with your db.

After more of few week, i was little out of zone, and i think i found what is the problem.
At first view my NB is the problem, i tried yesterday with another NB and its worked, I was able to identify almost all ecus. 
Today i reinstalled the OS and the problem persists on that NB.
Most probably he have personality smile
I sent you a pm.
Quote this message in a reply
08-09-2019, 08:45 AM,
Post: #8
RE: Problem Derelek USB Diag 3 - DDT2000.
Can someone upload the 3.0.2.9 version, cannot find it.
Many thanks
Quote this message in a reply
08-09-2019, 10:55 AM,
Post: #9
RE: Problem Derelek USB Diag 3 - DDT2000.
As requested, go and take what you need from here: https://cartechnology.co.uk/showthread.php?tid=56134

If you like my post and it helped you please press [Image: postbit_reputation.gif][Image: tyl_add.png]
Reputation: +1 - Renopower [+1]
Quote this message in a reply
[+] 1 user says Thank You to fantomel for this post
17-10-2019, 20:01 PM,
Post: #10
RE: Problem Derelek USB Diag 3 - DDT2000.
(08-09-2019, 10:55 AM)fantomel Wrote:  As requested, go and take what you need from here: https://cartechnology.co.uk/showthread.php?tid=56134

Do you have ddt2000 version 4 by any chance?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  alinace iv chinese problem davito1 4 183 31-01-2024, 18:08 PM
Last Post: davito1
ORenult Renault Clio5 Multimendia Problem, kukata_83 12 779 12-01-2024, 13:52 PM
Last Post: morfej
  megane 3 1.5 dci 3.4 delphi AC problem skyrimzz 2 138 08-11-2023, 22:20 PM
Last Post: skyrimzz
ORenult Renault CAN Clip problem BMWFXX 0 308 28-09-2023, 13:32 PM
Last Post: BMWFXX
  Nissan Navara Crankshaft sensor Problem spanaz1 4 434 12-08-2023, 15:04 PM
Last Post: Clusters
  Autel and LaunchTech problem seeing misfire CATAHA 0 251 19-06-2023, 18:50 PM
Last Post: CATAHA
  problem with programming card megane3 bboctavian 1 322 29-01-2023, 12:01 PM
Last Post: KeeleyKaayz
ORenult Master 3ph1 '17 ABS unit problem Olgierdo83 0 275 16-10-2022, 14:51 PM
Last Post: Olgierdo83
ORenult DDT2000 COLLECTION fantomel 6 3,712 01-09-2022, 15:38 PM
Last Post: jawier130
  Laguna 2 1.9dci ECU not recognise problem galisdoo 2 464 25-08-2022, 06:41 AM
Last Post: galisdoo

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content