[Sanyi85]

I have a big problem!

I have a E91
I try to programming and flash it but always had a fail:

ISTA P (3.66.2) said it was replaced and need to programming it, ISTA is do it, but after that it will "Red dot" again.
I use original ICOM Next + MOST

https://photos.app.goo.gl/xXjU9Yr3qfKCywBW9

https://photos.app.goo.gl/ELXkJDGk7uUX9TzN8

Anybody has idea?

Edit: Videos is uploaded!

[emhtuning]

if con module is used then you will need to change VIN first ,

btw pictures are not accessible

[Sanyi85]

if con module is used then you will need to change VIN first ,

btw pictures are not accessible

Videos are uploaded!

[inspi1981]

And for programming CON, You have to choose complete programming

[Sanyi85]

And for programming CON, You have to choose complete programming

I was choice complete, it is do it, and after that everything start from the first:

CON will "Red dot" and need to programming again. It cannot be done!

[Vojno]

Write that there is a difference between CAS and FRM.
Has the FRM been fixed?

I sent you a PM!

[emhtuning]

as Vojno said , all your problems starts from the FRM - CAS FA and VIN mismatch .

ISTA P will give you a lot of headache if car is not in factory status , from the video I see that :

my advice to you , forget about ISTA P on this car as it wont help you at all , use something more professional like NCSexpert - tool32 and INPA to check VO and check VIN numbers in each module and fix whatever problems you see

[Sanyi85]

OK! Thank you!

I will talk Vonjo and i hope he will do it for me!

[emhtuning]

OK! Thank you!

I will talk Vonjo and i hope he will do it for me!

if you have all the tools installed , you can ask me too if you still need help

[Fx82]

Else I can help you as well.