[spyderboyant]

That's no good. You have dlink? If not TTL mate...

Looking at CN versus CS they share certain things... Only difference is some MMX images - ie EIFS.

From what I understand the /20/ or /50/ refers to "HA"rdware revisions. So looking at MUConsistency in those updates we can see that there is a summary at the top for say:

CN: MMX2\eifs\20\default\application = 1543
CS: MMX2\eifs\50\default\application = 2045

But then when you look further into the MUConsistency it appears the /20 is for HARDWARE revisions from 21 onwards EXCLUDING *65* where CS is for HARDWARE revisions from 51 onwards.. Each hardware revision shares the actual same EIFS image...

FOR ***CN*** all hardware revisions are 1543
MMX2\eifs\21\default\application = 1543
MMX2\eifs\22\default\application = 1543
MMX2\eifs\23\default\application = 1543
MMX2\eifs\24\default\application = 1543
MMX2\eifs\40\default\application = 1543
MMX2\eifs\41\default\application = 1543
MMX2\eifs\42\default\application = 1543
MMX2\eifs\43\default\application = 1543
MMX2\eifs\44\default\application = 1543
MMX2\eifs\45\default\application = 1543
MMX2\eifs\50\default\application = 1543
MMX2\eifs\51\default\application = 1543
MMX2\eifs\52\default\application = 1543
MMX2\eifs\60\default\application = 1543
##No 65
MMX2\eifs\70\default\application = 1543
MMX2\eifs\71\default\application = 1543
MMX2\eifs\72\default\application = 1543
MMX2\eifs\73\default\application = 1543
MMX2\eifs\74\default\application = 1543
MMX2\eifs\80\default\application = 1543
MMX2\eifs\81\default\application = 1543
MMX2\eifs\90\default\application = 1543

***FOR CS*** All supported hardware revisions are 2045
##No 21
##No 22
##No 23
##No 24
##No 40
##No 41
##No 42
##No 43
##No 44
##No 45
##No 50
MMX2\eifs\51\default\application = 2045
MMX2\eifs\52\default\application = 2045
MMX2\eifs\60\default\application = 2045
MMX2\eifs\65\default\application = 2045
MMX2\eifs\70\default\application = 2045
MMX2\eifs\71\default\application = 2045
MMX2\eifs\72\default\application = 2045
MMX2\eifs\73\default\application = 2045
MMX2\eifs\74\default\application = 2045
MMX2\eifs\80\default\application = 2045
MMX2\eifs\81\default\application = 2045
MMX2\eifs\90\default\application = 2045

[spyderboyant]

Flashed from "AF" 976 to "CS" 1438. I can confirm it works on 4M0 035 035 but a few things don't work.

MIB2 now reports version "J" from 976 "G"

> WiFi telnet is no longer possible.
> installed RadioDB for FM Logos but no options under Radio to add logos...
> No audio from DVB-T (this was flashed from 8V0 9191 191 D (2260) to "G" (2660). CN keeps it at (2260)
> Partial functioning of Audi RSE tablets. Can see car stuff but not DVD player or DVB-T... Again, these were flashed to a new version.

I think its time to go back to CN as it looks like CN is the latest for Q7s..